On Thu, 5 Jun 2003 20:56:50 +0200, Michael Nottebrock <[EMAIL PROTECTED]> wrote:
On Thursday 05 June 2003 20:10, Jeremy Messenger wrote:
I own the same chipest here, which it is support in 4.x and no longer in
5.x.. :-( Note that, I only check in the 5.x's NOTES
You didn't check in the right NOTES then. 5-CURRENT has different NOTES files, one general, machine independent and several smaller others for each platform. The machine independent is in /usr/src/sys/conf, the others are in /usr/src/sys/<ARCH>/conf.
Do'h! You are right that I didn't check in /usr/src/sys/conf/.. It does exist and I am doing the rebuild kernel right now.. Thanks..
Here's the result:
================================
# dmesg | grep via
viapropm0: SMBus I/O base at 0x5000
viapropm0: <VIA VT82C686A Power Management Unit> port 0x5000-0x500f at device 7.4 on pci0
viapropm0: failed to enable port mapping!
viapropm0: could not allocate bus space
device_probe_and_attach: viapropm0 attach returned 6
================================
================================
[EMAIL PROTECTED]:7:4: class=0x0c0500 card=0x30571106 chip=0x30571106 rev=0x40 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82C686A/B ACPI Power Management Controller'
class = serial bus
subclass = SMBus
================================
I don't know what the errors mean..
Cheers, Mezz
It's only thing that I dislike about 5.x is example configure files move to the different places (ie: NOTES, make.conf and etc).. I will get use to them, thought..
Cheers, Mezz
-- bsdforums.org 's moderator, mezz. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"
