hi, I can't boot recent CURRENT on PCM-5823. Is this the problem of ATA driver?
Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD SBOX #0: Sun Mar 2 12:21:09 GMT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ab2000. Preloaded mfs_root "/boot/mfsroot" at 0xc0ab20a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 299237489 Hz CPU: Cyrix GXm (299.24-MHz 586-class CPU) Origin = "CyrixInstead" Id = 0x540 DIR=0x8244 Stepping=8 Revision=2 real memory = 131596288 (125 MB) avail memory = 116523008 (111 MB) Allocating major#253 to "net" Allocating major#252 to "pci" md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0678210 npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 3 entries at 0xc00fd9b0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 fxp0: <Intel Embedded 10/100 Ethernet> port 0xe000-0xe03f mem 0xe2020000-0xe203ffff,0xe2040000-0xe2040fff irq 15 at device 11.0 on pci0 fxp0: Ethernet address 00:d0:c9:53:47:17 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Embedded 10/100 Ethernet> port 0xe400-0xe43f mem 0xe2000000-0xe201ffff,0xe2041000-0xe2041fff irq 11 at device 12.0 on pci0 fxp1: Ethernet address 00:d0:c9:53:47:18 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 pci0: <bridge, PCI-unknown> at device 18.1 (no driver attached) atapci0: <Cyrix 5530 ATA33 controller> port 0xf000-0xf00f at device 18.2 on pci0 atapci0: unable to map interrupt ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ pci0: <multimedia, audio> at device 18.3 (no driver attached) pci0: <display, VGA> at device 18.4 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xe2045000-0xe2045fff irq 15 at device 19.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata1 at port 0x376,0x170-0x177 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> db> trace Fatal trap 12: page fault while in kernel mode fault virtual address = 0x0 fault code = supervisor read, page not present instruction pointer = 0x8:0xc046a380 stack pointer = 0x10:0xc0ad49f8 frame pointer = 0x10:0xc0ad49fc code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = resume, IOPL = 0 current process = 0 (swapper) kernel: type 12 trap, code=0 --hwh To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
