I tried to do a "camcontrol reset all" while it was giving me this error. Nothing appeared to happen (the error continued to scroll) so I removed the USB device.
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): CAM Status 0x39
umass-sim0:0:0:0: func_coe 0x0901: Invalid target (target needed)
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): CAM Status 0x39
umass-sim0:0:0:0: func_code 0x0901: Invalid target (target needed)
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): Error 5
(probe0:umass-sim0:0:0:0): Retries Exhausted
umass-sim0:0:0:0: func_code 0x0901: Invalid target (target needed)
(da0:umass-si,0:0:0:0): Synchronize cahce failed, status == 0x39, scsi status == 0x0
umass-sim0:0:0:0: func_code 0x0901: Invalid target (target needed)
(da0:umass-sim0:0:0:0): removing device entry
su-2.05b# panic (null): Unknown state 1
syncing disks, buffers remaining.... panic: bwrite: buffer is not busy???
Here is another panic from a kernel built Feb 4. The computer was booted with the USB device attached, and it refused to proceed past "da0: 15mb (31424 512 byte sectors.." so I detached it.
umass0: SCM Microsystems Inc. eUSB MultiMediaCard Adapter, rev 1.10/4.04, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <eUSB MultiMediaCard > Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 15MB (31424 512 byte sectors: 64H 32S/T 15C)
umass0: at uhub0 port 1 (addr 2) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
umass0: SCM Microsystems Inc. eUSB MultiMediaCard Adapter, rev 1.10/4.04, addr 2
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
umass0: BBB reset failed, IOERROR
umass0: BBB bulk-in clear stall failed, IOERROR
umass0: BBB bulk-out clear stall failed, IOERROR
(da0:umass-sim0:0:0:0): removing device entry
Opened disk da0 -> 5
umass0: at uhub0 port 1 (addr 2) disconnected
umass0: detached
umass0: SCM Microsystems Inc. eUSB MultiMediaCard Adapter, rev 1.10/4.04, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <eUSB MultiMediaCard > Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 15MB (31424 512 byte sectors: 64H 32S/T 15C)
Fatal trap 12: page fault while in kernel mode fault virtual addresstion pointer = 0x8:0xc02faac0 stack pointer = 0x10:0xd67b0b74 frame pointer = 0xse 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupnumber = 12 panic: page fault
If more information is needed on either of the panics, please inform me.
Thank you, Pat Lathem
Pat Lathem wrote:
Hi list,
I'm still trying to get this drive working. I booted with a -v flag, and this the output now: Can anyone recommend any changes or patches to get this to work work? My kernel is 5.0-currrent built on March 1st.
Thank you, Pat Lathem
<cut, sorry, the email is already very long>
To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message