On Mon, Jan 27, 2003 at 10:18:48PM +0100, Toni Schmidbauer wrote: > hi, > > got no useful response from -mobile so re-posting to -current: > > i am having problems with 5.0-REL on an ibm thinkpad 600x.the xl > driver for my 3com 3ccfe575ct writes the following message to the > console "xl0: watchdog timeout". > > after skimming through newsgroups i found out that it has > something to the with irq mapping. the cardbus controller uses > irq11. my first try was to disable the usb-controller because it > uses irq11 too. no luck! > > a boot -v shows me that a hole bunch of pci devices uses irq11... > > the problem is that the network connection is _very_ slow. i > think its because of the irq conflict. had anyone the same > problems before? > > i also tried a different card (3com 3cxfe575bt) - same effect. > > removing the card from the pcmcia slot prompts: > "xl0: command never completed!" and > "xl0: reset didn't complete" > > find attached: > - pciconf -v -l > - boot -v with usb > - boot -v w/o usb > > thanks for any help
Try to add hw.pci.allow_unsupported_io_range="1" in your /boot/loader.conf.local and reboot your machine. -- Rgdz, /"\ ASCII RIBBON CAMPAIGN Sergey Osokin aka oZZ, \ / AGAINST HTML MAIL http://ozz.pp.ru/ X AND NEWS / \ To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message