On Mon, 20 Jan 2003, Kenneth Culver wrote: > > > Hi, > > > I just tried to use a Genesys Logic USB Compact Flash card reader, > > > and the following messages come up, followed by a panic: > > > > > > Jan 19 19:41:30 kenshin kernel: umass0: Genesys Logic USB Storage Device, > > > rev 1. > > > 10/1.13, addr 2 > > > Jan 19 19:41:30 kenshin kernel: umass0: Get Max Lun not supported > > > (STALLED) > > > Jan 19 19:41:30 kenshin kernel: umass0: BBB reset failed, IOERROR > > > Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-in clear stall failed, > > > IOERROR > > > Jan 19 19:41:30 kenshin kernel: umass0: BBB bulk-out clear stall failed, > > > IOERROR > > > > > > After this, FreeBSD panics. I havn't had time to get a full backtrace, but > > > I'll send that once I get it. In the mean-time, is there any fix for the > > > error I'm getting? > > > I think I know what the problem is. Basically a lot of devices have > problems with I guess the 6 byte commands... if you look in scsi_da.c you > can find several "quirks" entries. I'm working on figuring out what to put > for my vendor and product id's in order to add the quirk for my device.
To start, copy a quirk entry and wildcard a lot: "Genesys*", "*", "*" Then do camcontrol inquiry daX and change the quirk to be more specific. Backtrace would be useful since you shouldn't be getting a panic. At the worst, your usb reader just wouldn't work. -Nate To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
