i have a hp omnibook xe4100 and the acpi stuff has some problems i dont know how to solve them.
on of the problems this here:
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
this error occurs every time i boot and often during the work with the laptop.
the other problem is that i dont get any information about my battery status. apm and sysctl -a hw.acpi are always stating that the ac is online, even when its not plugged in.
I included the output of dmesg, sysctl -a hw.acpi and apm.
My Kernel is build without APM Support.
In hoping for any help
regards
Adrian Neumaier
hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: S1 hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 0 hw.acpi.s4bios: 1 hw.acpi.verbose: 0 hw.acpi.disable_on_poweroff: 1 hw.acpi.cpu.max_speed: 16 hw.acpi.cpu.current_speed: 16 hw.acpi.cpu.performance_speed: 16 hw.acpi.cpu.economy_speed: 8 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 30 hw.acpi.thermal.tz0.temperature: 3312 hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: 3632 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3682 hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.acline: 1 hw.acpi.battery.life: 100 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC-20021213-JPSNAP #0: Tue Dec 31 02:03:06 CET 2002
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/LAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05bb000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05bb0a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1202735180 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1202.74-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 637534208 (608 MB)
avail memory = 613117952 (584 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 6 entries at 0xc00fdf60
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.AGPB - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8231 ATA100 controller> port 0x1000-0x100f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1020-0x103f irq 9 at device 17.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
pci0: <bridge, PCI-unknown> at device 17.4 (no driver attached)
pcm0: <VIA VT82C686A> port 0x1010-0x1013,0x1014-0x1017,0x1400-0x14ff irq 10 at device
17.5 on pci0
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x1c00-0x1cff mem 0xe8000000-0xe80000ff
irq 11 at device 18.0 on pci0
../../../vm/uma_core.c:1330: could sleep with "vr0" locked from
../../../pci/if_vr.c:666
vr0: Ethernet address: 00:c0:9f:17:27:66
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
../../../vm/uma_core.c:1330: could sleep with "vr0" locked from
../../../pci/if_vr.c:292
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem
0xdc000-0xdffff,0xd8000-0xdbfff,0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad0: 19077MB <IC25N020ATCS04-0> [38760/16/63] at ata0-master UDMA100
acd0: DVD-ROM <QSI DVD-ROM SDR-083> at ata1-master PIO4
MBREXT Slice 5 on ad0s3:
0000 00 fe ff ff 82 fe ff ff 3f 00 00 00 84 1c 20 00 |........?..... .|
[0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:2104452
0000 00 fe ff ff 05 fe ff ff c3 1c 20 00 67 d2 c5 00 |.......... .g...|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:2104515 l:12964455
MBREXT Slice 6 on ad0s3:
0000 80 fe ff ff 83 fe ff ff 3f 00 00 00 28 d2 c5 00 |........?...(...|
[0] f:80 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:12964392
0000 00 fe ff ff 05 fe ff ff 2a ef e5 00 c3 1c 20 00 |........*..... .|
[1] f:00 typ:5 s(CHS):255/254/255 e(CHS):255/254/255 s:15068970 l:2104515
MBREXT Slice 7 on ad0s3:
0000 00 fe ff ff 83 fe ff ff 3f 00 00 00 84 1c 20 00 |........?..... .|
[0] f:00 typ:131 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:2104452
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
Mounting root from ufs:/dev/ad0s2a
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ACPI-1287: *** Error: Method execution failed, AE_ERROR
ums0: at uhub0 port 1 (addr 2) disconnected
ums0: detached
uhub0: port error, restarting port 1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND
pid 88326 (mozilla-bin), uid 1001: exited on signal 10
pid 88941 (mozilla-bin), uid 1001: exited on signal 10
pid 88948 (opera), uid 1001: exited on signal 11 (core dumped)
pid 88955 (opera), uid 1001: exited on signal 11 (core dumped)
APM version: 1.2
APM Managment: Disabled
AC Line status: on-line
Battery status: unknown
Remaining battery life: 100%
Remaining battery time: unknown
Number of batteries: 1
Battery 0:
Battery status: unknown
Remaining battery life: 100%
Remaining battery time: 0:00:00
Resume timer: Thu Jan 1 00:59:59 1970
Resume on ring indicator: disabled
APM Capabilities:
unknown
