Hi, All !
I'm run RELENG_5_0 from 28.12.2002 and ISA SoundBlaster 16 sound
card does not work when acpi.ko turned on. When ACPI disabled,
sound work fine. Under -STABLE it work without problems too.
BIOS settings was tuned : irq 5 and dma 1,5 used by ISA.
When attempting to play file, kernel print message :
"pcm0:play:0: play interrupt timeout, channel dead."
And no sound output at all.
Any ideas ?
Dmesg output with acpi turned on :
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RC #5: Sat Dec 28 02:01:39 GMT 2002
mvb@Devastator:/usr/src/sys/i386/compile/DEVASTATOR5
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03f5000.
Preloaded elf module "/boot/kernel/snd_sb16.ko" at 0xc03f50a8.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc03f5158.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc03f5204.
Preloaded elf module "/boot/kernel/random.ko" at 0xc03f52b0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc03f535c.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 300683012 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
+Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT
+,PSE36,MMX,FXSR>
real memory = 201314304 (191 MB)
avail memory = 191238144 (182 MB)
Initializing GEOMetry subsystemPentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P2B-B > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 5 entries at 0xc00f0d10
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xd800-0xd80f at device 4.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 4.2 (no driver attached)
pci0: <bridge, PCI-unknown> at device 4.3 (no driver attached)
pci0: <display, VGA> at device 10.0 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
+0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sbc0: <SoundBlaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
pcm0: <SB16 DSP 4.13> on sbc0
Timecounters tick every 10.000 msec
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA33
ad3: 19595MB <QUANTUM FIREBALLP LM20.5> [39813/16/63] at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0b
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC CD-W540E 1.0C> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
/boot/device.hints
...
hint.sbc.0.at="isa"
hint.sbc.0.port="0x220"
hint.sbc.0.irq="5"
hint.sbc.0.drq="1"
hint.sbc.0.flags="0x15"
...
/dev/sndstat :
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <SB16 DSP 4.13> at io 0x220 irq 5 drq 1:5 bufsz 4096d (1p/1r/0v channels
+duplex default)
Kernel config :
--------------------------------------------------------------
machine i386
cpu I686_CPU
ident DEVASTATOR5
maxusers 0
makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols
options DDB
options INCLUDE_CONFIG_FILE # Include this file in kernel
options INET #Internet communications protocols
options FFS #Fast filesystem
options SOFTUPDATES
options UFS_ACL
options UFS_DIRHASH
options COMPAT_43
options COMPAT_FREEBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #kernel tracing
options _KPOSIX_PRIORITY_SCHEDULING
device isa
device pci
device fdc # Floppy
options ATA_STATIC_ID # Static device numbering
device ata
device atadisk # ATA disk drives
device atapicam # emulate ATAPI devices as SCSI ditto via CAM
# needs CAM to be present (scbus & pass)
device scbus # SCSI bus (required)
device pass # Passthrough device (direct SCSI access)
device cd
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
device sc # The syscons console driver (sco color console
compatible).
options SC_TWOBUTTON_MOUSE
options SC_DFLT_FONT
makeoptions SC_DFLT_FONT=cp866
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
options SC_KERNEL_CONS_ATTR=(FG_LIGHTBLUE|BG_BLACK)
options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_BLUE)
device npx # Floating point
device sio # COM ports
device loop #Network loopback device
device ether #Generic Ethernet
device bpf #Berkeley packet filter
device pty #Pseudo ttys
options RANDOM_IP_ID
options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN
--
Regards, Vladimir.
----
OTKPblTKI HA http://cards.alkar.net
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
