Hackers, on yesterday's -current i see
ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR this is IBM ThinkPad 390x laptop. dmesg and acpidump are attached. any ideas? thanks max
Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #2: Sat Nov 23 22:45:21 PST 2002 root@:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06ac000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06ac0a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 447692565 Hz CPU: Pentium III/Pentium III Xeon/Celeron (447.69-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268369920 (255 MB) avail memory = 253554688 (241 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard Using $PIR table, 8 entries at 0xc00fdf40 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz can't fetch resources for \\_SB_.PCI0.ISA_.FIR_ - AE_AML_INVALID_RESOURCE_TYPE acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNKD irq 10: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.2.3 \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.3.0 \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.3.1 \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.4.0 \\_SB_.PCI0.ISA_.LNKC irq 7: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.4.1 \\_SB_.PCI0.ISA_.LNKC irq 7: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.7.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNKD irq 10: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.2.3 \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.3.0 \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.3.1 \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.4.0 \\_SB_.PCI0.ISA_.LNKC irq 7: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.4.1 \\_SB_.PCI0.ISA_.LNKC irq 7: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.6.0 \\_SB_.PCI0.ISA_.LNKB irq 5: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 0.7.0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 ---- initial configuration ------------------------ \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 1.0.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.PCI0.ISA_.LNKA irq 3: [ 3 4 5 6 7 10 11 14 15] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 2.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x10c0-0x10cf at device 2.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 10 at device 2.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached) cbb0: <TI1251B PCI-CardBus Bridge> mem 0x10000000-0x10000fff irq 3 at device 3.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1251B PCI-CardBus Bridge> mem 0x20000000-0x20000fff irq 3 at device 3.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pci0: <simple comms> at device 6.0 (no driver attached) pci0: <multimedia, audio> at device 7.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% ad0: 28615MB <IC25N030ATCS04-0> [58140/16/63] at ata0-master UDMA33 acd0: CDROM <CRN-8241B> at ata1-master PIO4 MBREXT Slice 5 on ad0s4: 0000 00 fe ff ff 82 fe ff ff 3f 00 00 00 a2 16 08 00 |........?.......| [0] f:00 typ:130 s(CHS):255/254/255 e(CHS):255/254/255 s:63 l:530082 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR Mounting root from ufs:/dev/ad0s2a ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR ACPI-1354: *** Error: Method execution failed, AE_ERROR acpi_tz0: _ACx value is absurd, ignored (229.0C) acpi_tz0: _ACx value is absurd, ignored (229.0C) acpi_tz0: _ACx value is absurd, ignored (229.0C) acpi_tz0: _ACx value is absurd, ignored (229.0C)
= acpidump_tp390x.txt }Ys8+T OܴMU$RՖ,=]FEIT9#};wb (ɱP3jrpv`o5s;Q CBQ>,wr?<34VhG絿|367v9*~Xop;YmE.Z C3Pg>j4`˥М 6:~xu5o5n)+Q]2u~6 g7Yg(]9ܱ ϭF pu#AF8$M?6c8돮QiO?vͽɿ5鷦Yp<ͫuh9Bf#k6t_5c9(r!ԍZp:п~>M./AiIy;«wdYo43Fm<@˻"mxk#4tg3x,/]n̸is2F!H,&