Hi Folks,
I see this error while booting into BSD and I presume this might be the
problem that acpi on my TP does not work.
The errors are something like this.
------------------------------------------------
acpi0: <IBM TP-1G > on motherboard
Using $PIR table, 14 entries at 0xc00fdeb0
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1354: *** Error: Method execution failed, AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
------------------------------------------------
Dmesg on the box
------------------------------------------------
FreeBSD 5.0-CURRENT #0: Fri Nov 22 17:37:35 IST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0618000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc06180a8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0618154.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0618200.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1198990668 Hz
CPU: Pentium 4 (1198.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,P
AT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 267780096 (255 MB)
avail memory = 253579264 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
------------------------------------------------
uname -a
--------
FreeBSD tango 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Fri Nov 22 17:37:35 IST 2002
root@tango:/usr/obj/usr/src/sys/GENERIC i386
Any fix for this ? I am unable to use ACPI in FBSD.
TIA
Regards
Sid
--
The church is near but the road is icy; the bar is far away but I will
walk carefully.
-- Russian Proverb
Sid Carter - http://khader.net
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
