On Fri, Oct 04, 2002 at 16:03:08 -0400, John Baldwin wrote:
>
> On 03-Oct-2002 Kenneth D. Merry wrote:
> >
> > I have a Supermicro P3TDE6 motherboard (Serverworks HE-SL chipset) that
> > won't boot with today's -current.
> >
> > -current from August 23rd sources boots fine.
> >
> > It looks like the PCI bus probe is failing somehow.
> >
> > I've seen other folks complaining about PCI problems, and I suppose this is
> > related, but I don't think I've seen quite the same failure reported.
> >
> > I've attached dmesg output from the working kernel (August 23rd sources)
> > and the broken kernel (sources from ~1500 MDT today).
> >
> > Any ideas on how to fix this?
>
> Turn off ACPI for now (set hint.acpi.0.disabled=1). Iwasaki-san has a fix
> for this that I guess he should commit.
The new ACPI drop that went in today partially fixes my problem. The PCI
bus with my SCSI and network controllers on it is now probed, so I can
boot.
The PCI bus with my gigabit ethernet board isn't probed, though, with ACPI
turned on. It is with ACPI turned off.
I've attached dmesg output with and without ACPI turned on.
Ken
--
Kenneth Merry
[EMAIL PROTECTED]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Oct 4 20:03:56 MDT 2002
[EMAIL PROTECTED]:/usr/home/ken/perforce/FreeBSD-ken/src/sys/i386/compile/gondolin
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0568000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05680a8.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1266.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2684289024 (2621376K bytes)
avail memory = 2602598400 (2541600K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Pentium Pro MTRR support enabled
ACPI-0623: *** Warning: Type override - [DEB_] had invalid type (Integer) for
Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [MLIB] had invalid type (Integer) for
Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [IO__] had invalid type (Integer) for
Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [DATA] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [SIO_] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [SB__] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [PM__] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [ICNT] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [ACPI] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [OSB4] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [PM__] had invalid type (String) for Scope
operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [BIOS] had invalid type (Integer) for
Scope operator, changed to (Scope)
ACPI-0623: *** Warning: Type override - [CMOS] had invalid type (Integer) for
Scope operator, changed to (Scope)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <RCC RCCNILE > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
Using $PIR table, 10 entries at 0xc00f52e0
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_cpu2: <CPU> on acpi0
acpi_cpu3: <CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
IOAPIC #1 intpin 10 -> irq 2
IOAPIC #1 intpin 11 -> irq 5
IOAPIC #1 intpin 15 -> irq 9
pcib1: <ACPI PCI-PCI bridge> at device 0.1 on pci0
pci1: <ACPI PCI bus> on pcib1
IOAPIC #1 intpin 14 -> irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
0xfeafc000-0xfeafcfff irq 2 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xfeaff000-0xfeafffff irq 5 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem
0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:bb:74
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 15.1 (no driver attached)
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib2: <ACPI Host-PCI bridge> on acpi0
acpi0: couldn't attach pci busdevice_probe_and_attach: pcib2 attach returned 6
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcib2: <ACPI Host-PCI bridge> on acpi0
acpi0: couldn't attach pci busdevice_probe_and_attach: pcib2 attach returned 6
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xc0000-0xcbfff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pmtimer0 on isa0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Timecounters tick every 10.000 msec
Waiting 2 seconds for SCSI devices to settle
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318406LW 0108> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318406LW 0108> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da1s1a
cd0 at ahc1 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-8XCS 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ohci0: <OHCI (generic) USB controller> mem 0xfeafe000-0xfeafefff irq 10 at device 15.2
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Oct 4 20:03:56 MDT 2002
[EMAIL PROTECTED]:/usr/home/ken/perforce/FreeBSD-ken/src/sys/i386/compile/gondolin
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0520000.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1266.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2684289024 (2621376K bytes)
avail memory = 2602897408 (2541892K bytes)
Programming 16 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 16 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x000f0011, at 0xfec00000
io1 (APIC): apic id: 5, version: 0x000f0011, at 0xfec01000
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 10 entries at 0xc00f52e0
pcib0: <ServerWorks host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
IOAPIC #1 intpin 10 -> irq 2
IOAPIC #1 intpin 11 -> irq 5
IOAPIC #1 intpin 15 -> irq 9
pcib1: <PCI-PCI bridge> at device 0.1 on pci0
pci1: <PCI bus> on pcib1
IOAPIC #1 intpin 14 -> irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
0xfeafc000-0xfeafcfff irq 2 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xfeaff000-0xfeafffff irq 5 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xd400-0xd43f mem
0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 9 at device 6.0 on pci0
fxp0: Ethernet address 00:30:48:21:bb:74
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0
isa0: <ISA bus> on isab0
pci0: <mass storage, ATA> at device 15.1 (no driver attached)
pci0: <serial bus, USB> at device 15.2 (no driver attached)
pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard
pci2: <PCI bus> on pcib2
IOAPIC #1 intpin 8 -> irq 16
ti0: <Netgear GA620 1000baseT Gigabit Ethernet> mem 0xfebfc000-0xfebfffff irq 16 at
device 2.0 on pci2
ti0: Ethernet address: 00:02:e3:00:34:10
orm0: <Option ROMs> at iomem 0xd1800-0xd27ff,0xc0000-0xcbfff on isa0
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
pmtimer0 on isa0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Waiting 2 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318406LW 0108> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318406LW 0108> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da2: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <IBM DDYS-T36950N S93E> Fixed Direct Access SCSI-3 device
da3: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da3: 35003MB (71687340 512 byte sectors: 255H 63S/T 4462C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/da1s1a
cd0 at ahc1 bus 0 target 4 lun 0
cd0: <PLEXTOR CD-ROM PX-8XCS 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ohci0: <OHCI (generic) USB controller> mem 0xfeafe000-0xfeafefff irq 10 at device 15.2
on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
