:...
:> stuff (it was not used on that machine) and it booted fine, I think that
:> might just cure the SMP problem you are seeing too.....
:
:Thanks for the suggestion.
:
:Unfortunately it still hangs with SMP enabled and the ATA drivers commented
:out of the GENERIC config.
:
:Ken
:-- 
:Kenneth Merry

    Just as a data point, I've been running -current on a 2xCPU SMP
    system (DELL2550) for a few weeks and it's always booted fine.

    For the last few months I have noticed occassional freezes occuring
    at odd times long after boot.  I have no idea why it happens.

                                        -Matt

#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.260 2000/06/13 22:28:46 peter Exp $

machine         i386
#cpu            I386_CPU
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           DELL2550
maxusers        0

hints           "TEST.hints"            #Default places to look for devices.

options         SCSI_DELAY=5000
#options         MAXMEM="(64*1024)"
options         DDB
options         INVARIANTS
options         INVARIANT_SUPPORT
options         SOFTUPDATES
#options                WITNESS
#options        SHMALL=65537
#options        SHMMAXPGS=65537
#options         GDB_REMOTE_CHAT
options         ALT_BREAK_TO_DEBUGGER

# -Os broken
#
makeoptions     DEBUG=-g                #Build kernel with gdb(1) debug symbols
makeoptions     COPTFLAGS="-O -pipe"

#options        MATH_EMULATE            #Support for x87 emulation
options         INET                    #InterNETworking
#options        INET6                   #IPv6 communications protocols
options         FFS                     #Berkeley Fast Filesystem
options         MD_ROOT                 #MD is a potential root device
options         NFSCLIENT               #Network Filesystem
options         NFSSERVER               #Network Filesystem
options         NFS_ROOT                #NFS usable as root device, NFS required
options         MSDOSFS                 #MSDOS Filesystem
options         CD9660                  #ISO 9660 Filesystem
options         PSEUDOFS                #Pseudofs
options         PROCFS                  #Process filesystem
options         COMPAT_43               #Compatible with BSD 4.3 [KEEP THIS!]
#options        SCSI_DELAY=15000        #Delay (in ms) before probing SCSI
options         UCONSOLE                #Allow users to grab the console
options         KTRACE                  #ktrace(1) support
options         SYSVSHM                 #SYSV-style shared memory
options         SYSVMSG                 #SYSV-style message queues
options         SYSVSEM                 #SYSV-style semaphores
#options        P1003_1B                #Posix P1003_1B real-time extensions
#options        _KPOSIX_PRIORITY_SCHEDULING
#options        KBD_INSTALL_CDEV        # install a CDEV entry in /dev

# To make an SMP kernel, the next two are needed
#
options         SMP                     # Symmetric MultiProcessor Kernel
options         APIC_IO                 # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options        NCPU=2                  # number of CPUs
#options        NBUS=8                  # number of busses
#options        NAPIC=1                 # number of IO APICs
#options        NINTR=24                # number of INTs

device          isa
#device         eisa
device          pci
#options        COMPAT_OLDISA           # compatability shims for lnc, fe, le
#options        COMPAT_OLDPCI           # compatability shims for lnc, vx

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk                 # ATA disk drives
device          atapicd                 # ATAPI CDROM drives
device          atapifd                 # ATAPI floppy drives
device          atapist                 # ATAPI tape drives
options         ATA_STATIC_ID           #Static device numbering
#options        ATA_ENABLE_ATAPI_DMA    #Enable DMA on ATAPI devices

# SCSI Controllers
#device         ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
#device         amd             # AMD 53C974 (Teckram DC-390(T))
#device         dpt             # DPT Smartcache - See LINT for options!
#device         isp             # Qlogic family
#device         ncr             # NCR/Symbios Logic
#device         sym             # NCR/Symbios Logic (newer chipsets)

#device         adv
#device         adw
#device         bt
#device         aha
#device         aic

# SCSI peripherals
device          scbus           # SCSI bus (required)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

# RAID controllers
#device         ida             # Compaq Smart RAID
#device         amr             # AMI MegaRAID
#device         mlx             # Mylex DAC960 family

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc
device          atkbd
device          psm

device          vga

# splash screen/screen saver
device          splash

# syscons is the default console driver, resembling an SCO console
device          sc

# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER                 # support for X server on a vt console
#options        FAT_CURSOR              # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options        PCVT_SCANSET=2          # IBM keyboards are non-std

# Floating point support - do not disable.
device          npx

## Power management support (see LINT for more options)
#device         apm
#
## PCCARD (PCMCIA) support
#device         card
#device         pcic

# Serial (COM) ports
device          sio

## Parallel port
#device         ppc
#device         ppbus           # Parallel port bus (required)
#device         lpt             # Printer
#device         plip            # TCP/IP over parallel
#device         ppi             # Parallel port interface device
##device        vpo             # Requires scbus and da


# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         tx              # SMC 9432TX (83c170 ``EPIC'')
#device         vx              # 3Com 3c590, 3c595 (``Vortex'')
#device         wx              # Intel Gigabit Ethernet Card (``Wiseman'')

# PCI Ethernet NICs that use the common MII bus controller code.
device          miibus          # MII bus support
device          dc              # DEC/Intel 21143 and various workalikes
#device         rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         tl              # Texas Instruments ThunderLAN
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

## ISA Ethernet NICs.
#device         ed
#device         ex
#device         ep
#device         cs
#device         sn
## WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
## exists only as a PCMCIA device, so there is no ISA attatement needed
## and resources will always be dynamically assigned by the pccard code.
#device         wi
## Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
## work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
## mode (the factory default). If you set the switches on your ISA
## card for a manually chosen I/O address and IRQ, you must specify
## those paremeters here.
#device         an
## BayStack 660 and others
#device         awi
## Xircom pccard ethernet
#device         xe
## The probe order of these is presently determined by i386/isa/isa_compat.c.
#device         ie
#device         fe
#device         le
#device         lnc

# Pseudo devices - the number indicates how many units to allocated.
device          random          # Network loopback
device          loop            # Network loopback
device          ether           # Ethernet support
device          sl      4       # Kernel SLIP
device          ppp             # Kernel PPP
device          tun     4       # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          ccd
device          md              # Memory "disks"
device          gif     4       # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf     4       # Berkeley packet filter
device          bktr

## USB support
#device         uhci            # UHCI PCI->USB interface
#device         ohci            # OHCI PCI->USB interface
#device         usb             # USB Bus (required)
##device                udbp            # USB Double Bulk Pipe devices
#device         ugen            # Generic
#device         uhid            # "Human Interface Devices"
#device         ukbd            # Keyboard
#device         ulpt            # Printer
#device         umass           # Disks/Mass storage - Requires scbus and da
#device         ums             # Mouse
#device         urio            # Diamond Rio 500 MP3 player
## USB Ethernet, requires mii
#device         aue             # ADMtek USB ethernet
#device         cue             # CATC USB ethernet
#device         kue             # Kawasaki LSI USB ethernet

To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to