Looks quite fine for me...
looks like your cam was connected for about 6 mins...
what does a
$ mount -t msdos /dev/da0s1 /mnt
say?
Maybe you should take a look at the partition table with
$ fdisk da0
if it tells you something like
fdisk: invalid fdisk partition table found
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
<UNUSED>
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
sysid 165,(FreeBSD/NetBSD/386BSD)
start 32, size 126944 (61 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 61/ head 63/ sector 32
you should add a quirk for your cam...
Jan
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Joe Halpin
> Sent: Thursday, December 27, 2001 11:15 PM
> To: [EMAIL PROTECTED]
> Subject: USB camera
>
>
> I'm not able to mount my USB camera. This is what dmesg has to say about
> my usb port:
>
> $ dmesg | grep -i usb
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq
> 11 at device 7.2 on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> bash-2.05$ dmesg | grep -i scsi
> da0: <NIKON NIKON DSC E995 1.00> Removable Direct Access SCSI-2 device
> da0: <NIKON NIKON DSC E995 1.00> Removable Direct Access SCSI-2 device
>
>
> This is what /var/log/messages says when I plug the camera in and turn
> it on:
>
> Dec 27 15:41:01 fbsd /kernel: da0 at umass-sim0 bus 0 target 0 lun 0
> Dec 27 15:41:01 fbsd /kernel: da0: <NIKON NIKON DSC E995 1.00> Removable
> Direct Access SCSI-2 device
> Dec 27 15:41:01 fbsd /kernel: da0: 650KB/s transfers
> Dec 27 15:41:01 fbsd /kernel: da0: 15MB (31808 512 byte sectors: 64H
> 32S/T 15C)
> Dec 27 15:47:13 fbsd /kernel: umass0: at uhub0 port 1 (addr 2)
> disconnected
> Dec 27 15:47:13 fbsd /kernel: (da0:umass-sim0:0:0:0): lost device
> Dec 27 15:47:13 fbsd /kernel: (da0:umass-sim0:0:0:0): removing device
> entry
> Dec 27 15:47:13 fbsd /kernel: umass0: detached
>
>
> On my Linux box I just mount the device file and the camera shows up as
> a filesystem. Is it different in FreeBSD?
>
> Thanks
>
> Joe
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
>
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
