----- Original Message ----- From: "KT Sin" <[EMAIL PROTECTED]> To: "Jon Christopherson" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Saturday, December 15, 2001 10:24 PM Subject: Re: current doesnt see ps2 port with acpi enabled on intel vc820
> > I have just compiled and installed -current from this morning > > 7AMPST, and have noticed that when acpi is enabled in loader.conf the OS > > does not see the ps2 mouse port. When I turn off ACPI the mouse port > > shows up fine. Other than not seeing the ps2 port when in ACPI enabled > > mode, the OS works without a hitch on my motherboard. Any ideas? IF this > > is a known problem please let me know, as I have been off this list for > > a month or so. > I'm seeing the same problem on my MSI bookpc. For some reasons, the psm > device will fail to get an IRQ when ACPI is enabled. > > Can you try the attached patch and see if it helps? Hey I had the same problem but I assumed it was because I was slightly overclocking an amd k6-2 500 to 550 on a cheap old e-machine via-based motherboard. I applied your patch and now my mouse works. thanks! <blather> although, partially in response to the mouse problem, I never use my kvm switch anymore anyways, just vnc on the rare occasion I feel like playing with x on this box. </blather> Brian K. White -- [EMAIL PROTECTED] -- http://www.aljex.com/bkw/ +++++[>+++[>+++++>+++++++<<-]<-]>>+.>.+++++.+++++++.-.[>+<---]>++. filePro BBx Linux SCO Prosper/FACTS AutoCAD #callahans Satriani To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
