Its looking great so far! In the two production machines I put it in last
night, zero time outs as expected!! These are both EM machines. On my two
internal ET machines, also zero problems. The machines are in 10BaseT/UTP,
and 10BaseT full duplex.
inphy0: <i82562EM 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
and
fxp0: <Intel Pro/100 Ethernet> port 0xdf00-0xdf3f mem 0xff6ff000-0xff6fffff
irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:6f:f7:e0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Thank you *VERY* much for fixing this problem.
---Mike
At 01:43 PM 8/26/01 -0400, Mike Tancsa wrote:
>I have it on two machines with this chipset and it looks good so
>far. After installing, dmesg shows
>
>fxp0: <Intel Pro/100 Ethernet> port 0xc400-0xc43f mem
>0xd5001000-0xd5001fff irq 11 at device 8.0 on pci1
>fxp0: *** DISABLING DYNAMIC STANDBY MODE IN EEPROM ***
>fxp0: New EEPROM ID: 0x49a0
>fxp0: EEPROM checksum @ 0xff: 0xe441 -> 0xe443
>fxp0: *** PLEASE REBOOT THE SYSTEM NOW FOR CORRECT OPERATION ***
>fxp0: Ethernet address 00:01:80:02:d0:34
>inphy0: <i82562EM 10/100 media interface> on miibus1
>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
>
>and then one more reboot shows
>
>fxp0: <Intel Pro/100 Ethernet> port 0xc400-0xc43f mem
>0xd5001000-0xd5001fff irq 11 at device 8.0 on pci1
>fxp0: Ethernet address 00:01:80:02:d0:34
>inphy0: <i82562EM 10/100 media interface> on miibus1
>inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>
> ---Mike
>
>
>
>At 10:11 AM 8/26/2001 -0500, Jonathan Lemon wrote:
>> I believe that I have a real fix for the SCB timeout problems
>>that have been plauging users of recent Intel fxp boards.
>>
>> If you have a board that uses the Intel ICH2/ICH2-M chipset
>>(usually 815E style boards) and feel comfortable applying
>>patches to the system, please contact me to test a fix.
>>
>> The patch works on two different boards here, but I would like
>>to get some wider testing before I commit it to the tree.
>>--
>>Jonathan
>>
>>To Unsubscribe: send mail to [EMAIL PROTECTED]
>>with "unsubscribe freebsd-stable" in the body of the message
>
>--------------------------------------------------------------------
>Mike Tancsa, tel +1 519 651 3400
>Network Administration, [EMAIL PROTECTED]
>Sentex Communications www.sentex.net
>Cambridge, Ontario Canada www.sentex.net/mike
>
>
>To Unsubscribe: send mail to [EMAIL PROTECTED]
>with "unsubscribe freebsd-stable" in the body of the message
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
