John Baldwin wrote:
> Ok, sounds good, just checking. :) Can you provide the output of mptable for
> this box? In the SMP case, -current does interrupt routing for PCI interrupts
> a bit differently, which might be a possible reason. Hmm, but you are getting
> interrupts eventually it seems.
I can only get the thing past the hang maybe once in twenty+ tries.
Below is the mptable output (I don't remember what version of FreeBSD
I had installed when I did this, hope it doesn't matter). I'll try
the KTR stuff later tonight.
thanks!
dave c
===============================================================================
MPTable, version 2.0.15
-------------------------------------------------------------------------------
MP Floating Pointer Structure:
location: BIOS
physical address: 0x000ff780
signature: '_MP_'
length: 16 bytes
version: 1.1
checksum: 0xb9
mode: Virtual Wire
-------------------------------------------------------------------------------
MP Config Table Header:
physical address: 0x000f0bd0
signature: 'PCMP'
base table length: 284
version: 1.1
checksum: 0x28
OEM ID: 'AMI '
Product ID: 'CNB20HE '
OEM table pointer: 0x00000000
OEM table size: 0
entry count: 27
local APIC address: 0xfee00000
extended table length: 0
extended table checksum: 0
-------------------------------------------------------------------------------
MP Config Base Table Entries:
--
Processors: APIC ID Version State Family Model Step Flags
0 0x11 BSP, usable 6 8 6 0x387fbff
1 0x11 AP, usable 6 8 6 0x387fbff
--
Bus: Bus ID Type
0 PCI
1 PCI
2 PCI
3 ISA
--
I/O APICs: APIC ID Version State Address
4 0x11 usable 0xfec00000
5 0x11 usable 0xfec01000
--
I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
INT active-lo level 1 0:A 5 14
INT active-lo level 0 5:B 5 11
INT active-lo level 0 15:A 4 10
INT active-lo level 0 6:A 5 15
INT active-lo level 0 5:A 5 10
INT active-lo level 0 4:A 5 12
ExtINT active-hi edge 3 0 4 0
INT active-hi edge 3 1 4 1
INT active-hi edge 3 0 4 2
INT active-hi edge 3 3 4 3
INT active-hi edge 3 4 4 4
INT active-hi edge 3 6 4 6
INT active-hi edge 3 8 4 8
INT active-hi edge 3 12 4 12
INT active-hi edge 3 13 4 13
INT active-hi edge 3 14 4 14
INT active-hi edge 3 15 4 15
--
Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
ExtINT active-hi edge 3 0 255 0
NMI active-hi edge 0 0:A 255 1
===============================================================================
--
Dave Cornejo @ Dogwood Media, Fremont, California (also [EMAIL PROTECTED])
"There aren't any monkeys chasing us..." - Xochi
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
