I upgraded to last nights's -current.
UPGRADING said:
20010604:
pccard support for pci cards has been committed. You must change
your /etc/pccard.conf irq lines. It must match the irq used by
pcic device. Interrupt storms may result if you fail to do this.
Interrupt storms look a lot like a hang.
dmesg says:
kernel: pci_cfgintr_unique: hard-routed to irq 11
kernel: pci_cfgintr: 0:4 INTA routed to irq 11
kernel: pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.0 on pci0
kernel: pcic0: PCI Memory allocated: 0x44000000
kernel: pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr
save][pci only]
kernel: pccard0: <PC Card bus (classic)> on pcic0
kernel: pci_cfgintr_unique: hard-routed to irq 11
kernel: pci_cfgintr: 0:4 INTA routed to irq 11
kernel: pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.1 on pci0
kernel: pcic1: PCI Memory allocated: 0x44001000
kernel: pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr
save][pci only]
kernel: pccard1: <PC Card bus (classic)> on pcic1
but:
Card "Linksys"("EtherFast 10/100 PC Card (PCMPC100)") [] [(null)] matched
"Linksys" ("/Ether[Ff]ast 10/100 PC Card \(PCMPC100.*\)/") [(null)] [(null
)]
Failed to allocate IRQ for Linksys
pccardd started
in pccard.conf I had
irq 11
is this not what I was supposed to do?
what do I need to get my ethernet card working again?
--
__--_|\ Julian Elischer
/ \ [EMAIL PROTECTED]
( OZ ) World tour 2000-2001
---> X_.---._/ Presently in San Francisco, CA
v
config file follows:
----------------
machine i386
cpu I686_CPU
ident NMDM
maxusers 32
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options MATH_EMULATE
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
#options DEVFS #Device Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options DDB
# To make an SMP kernel, the next two are needed
device isa
device pci
# parallel port
device ppc
device ppbus
device lpt
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # At keyboard controller
device atkbd # at keyboard
device psm # psm mouse
device vga # VGA screen
# syscons is the default console driver, resembling an SCO console
device sc
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# Audio support
device pcm
# PCCARD (PCMCIA) support
device card # pccard bus
device pcic # PCMCIA bridge
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
# ISA Ethernet NICs. pccard nics included.
device miibus # MII bus support
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
# Pseudo devices - the number indicates how many units to allocated.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
device nmdm # back-to-back ttys (like pty but both ends are ttys)
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
