On Tue, Nov 07, 2000 at 12:19:40PM +0100, Rogier R. Mulhuijzen wrote:
> 
> >it is detected by the kernel and pccardd correctly as an ed0 device,
> >ifconfig configures it correctly, but as soon as the interface
> >is up, the kernel starts spewing ed0: device timeout...
> 
> This usually means IRQ stuffups.
> 
> >at first i suspected cable/hardware problem, and rebooted in windows98SE
> >to see if the problem is present there also - unfortunately, the card
> >works like a charm under windoze, so it isn't cable/hardware problem.
> 
> Reboot again, and see which IRQ the driver there uses. Then go into 
> /etc/pccard.conf and replace the ? on the config line with that IRQ.
> 

yeah, that fixed it. thanks, i should have known.

-tacho

--
   [i don't follow] | [http://daemonz.org/ || [EMAIL PROTECTED]]
   [everything should be made as simple as possible, but no simpler]
   0x44FC3339 || [02B5 798B 4BD1 97FB F8DB 72E4 DCA4 BE03 44FC 3339]


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message

Reply via email to