hi
Seems to work on the ASROCK TRX50 motherboard using 15-Stable
with 1 x 2.5 Gigabit LAN 10/100/1000/2500 Mb/s (Dragon RTL8125BG) chipset.
Switch is Cisco 1 Gbit so no high 2.5 Gbit test possible
rge0: flags=1008843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,LOWER_UP>
metric 0 mtu 1500
options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
ether 9c:6b:00:a8:af:18
inet 192.168.XXX.XXX netmask 0xffffff00 broadcast 192.168.XXX.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Den 2025-11-23 kl. 03:16, skrev Adrian Chadd:
hi!
i've ported Kevin Lo's openbsd driver for these realtek chipsets to
FreeBSD.
It works well enough for me to use on my laptop w/ RTL8125B / Killer
E3000.
I'm now opening it up to others who are willing to build/run a kernel
module to test the driver out and report back.
The driver source is at https://github.com/erikarn/if_rge_freebsd/
along with build instructions.
Please note that I'm only running this on -HEAD and I plan on landing
it on -HEAD before /maybe/ backporting it to stable/15 after the 15.0
release. I've no idea if it compiles or runs on stable/15 or the 15.0
pre-release images. If you're willing to give it a whirl then please
do and report back but I'm unlikely to add explicit earlier source
tree support in this repository (as again I'm going to land it in -HEAD.)
Thanks!
-adrian
--
-------------------------
Lars Tunkrans
Oracle SPARC/Solaris System Administrator
Fujitsu M12 SPARC Specilaist
