Am Tage des Herren Mon, 1 Dec 2025 13:46:45 +0100 (CET) Ronald Klop <[email protected]> schrieb:
> Thanks, > > Something I notice: > Nov 29 11:36:00 <14.6> hermann kernel: sysctl: oid > 'net.inet.ip.fw.default_to_accept' is a > read only tunable at line 98 This setting needs to go in /boot/loader.conf, > not in > /etc/sysctl.conf. I wouldn't care. First I put the line into /etc/sysctl.conf.local, until I realized that the OID is read only at the time sysctl.conf.local is read and the OID has to be placed in /boot/loader/conf[.local]. There it is now/there it was until now. It doe not have any effect. > > A bigger thing is that in the output you sent me I don't see dhclient being > started. > Are you sure your /etc/rc.conf is correct? Can you send your /etc/rc.conf? rc.conf is attached. A side note: apart from my initial note I made (I believe): I use a customized kernel. To avoid further requests slowing down the evaluation whether my problem is a bug or a stupid misconfiguration or unwanted sideeffect, I'll attach my kernel config files also. GENERIC is a link to GENERIC in /usr/src/sys/amd64/conf. Kind regards, oh > > Regards, > Ronald. > > > Van: FreeBSD User <[email protected]> > Datum: zaterdag, 29 november 2025 12:24 > Aan: Ronald Klop <[email protected]> > CC: FreeBSD CURRENT <[email protected]> > Onderwerp: Re: 15-STABLE: dhclient fails on em0 (Lenovo T580) > > > > On Fri, 28 Nov 2025 10:56:08 +0100 (CET) > > Ronald Klop <[email protected]> wrote: > > > > > Ok. > > > > > > Can you copy paste the console output of the booting system up until the > > > login prompt? > > > Or setup /var/log/console.log via /etc/syslog.conf and share that output. > > > > > > > Please find the requested output of syslog (set to console.debug) attached > > as well as a > > /var/log/message extract. > > > > > > Regards, > > > Ronald. > > > > > > > > > Van: FreeBSD User <[email protected]> > > > Datum: vrijdag, 28 november 2025 10:50 > > > Aan: Ronald Klop <[email protected]> > > > CC: FreeBSD CURRENT <[email protected]> > > > Onderwerp: Re: 15-STABLE: dhclient fails on em0 (Lenovo T580) > > > > > > > > On Fri, 28 Nov 2025 10:16:15 +0100 (CET) > > > > Ronald Klop <[email protected]> wrote: > > > > > > > > > It might be a typo in your mail, but it might also be the cause of > > > > > your issue. > > > > > This config needs to be in /etc/rc.conf, not in /etc/src.conf as you > > > > > state in your > > > > > mail. > > > > > > > > > > Regards, > > > > > Ronald. > > > > > > > > Sorry, a typo. > > > > > > > > > > > > > > > > > > > Van: FreeBSD User <[email protected]> > > > > > Datum: vrijdag, 28 november 2025 08:26 > > > > > Aan: FreeBSD CURRENT <[email protected]> > > > > > Onderwerp: 15-STABLE: dhclient fails on em0 (Lenovo T580) > > > > > > > > > > > > I recently switched from FreeBSD 14-STABLE to 15-STABLE (after > > > > > > branching of > > > > > > 16-CURRENT) on my working laptop, physically a Lenovo T580. Its LAN > > > > > > NIC FreeBSD > > > > > > recognizes as em0 (see below). System is at: 15.0-STABLE #16 > > > > > > stable/15-n281349-b903f27e171b: Fri Nov 28 05:20:32 CET 2025 amd64. > > > > > > Kernel config: > > > > > > GENERIC. Configuration has been setup and renewed acording to > > > > > > changes, consider > > > > > > the system as a fresh install. > > > > > > > > > > > > Problem: em0 never gets an IPv4 via DHCP on startup (init process > > > > > > via rc.conf). > > > > > > > > > > > > Configured in /etc/src.conf: > > > > > > [... WORKAROUND ...] > > > > > > netwait_enable="NO" > > > > > > netwait_if="em0" > > > > > > [...] > > > > > > > > > > > > and on a regular basis: > > > > > > [...] > > > > > > ifconfig_em0="DHCP" > > > > > > ifconfig_em0_ipv6="inet6 accept_rtadv -ifdisabled nud -no_radr > > > > > > auto_linklocal" > > > > > > [...] > > > > > > > > > > > > Very strange: after a final boot up, its very easy to require and > > > > > > achive an IPv4 > > > > > > with > > > > > > > > > > > > dhclient em0 > > > > > > > > > > > > I'm out of ideas ... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ==== > > > > > > pciconf: > > > > > > [...] > > > > > > em0@pci0:0:31:6: class=0x020000 rev=0x21 hdr=0x00 > > > > > > vendor=0x8086 > > > > > > device=0x15d8 subvendor=0x17aa subdevice=0x225a vendor = 'Intel > > > > > > Corporation' > > > > > > device = 'Ethernet Connection (4) I219-V' > > > > > > class = network > > > > > > subclass = ethernet > > > > > > bar [10] = type Memory, range 32, base 0xe8200000, size > > > > > > 131072, enabled > > > > > > cap 01[c8] = powerspec 3 supports D0 D3 current D0 > > > > > > cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 > > > > > > message > > > > > > cap 13[e0] = PCI Advanced Features: FLR TP > > > > > > > > > > > > [...] > > > > > > > > > > > > dmesg: > > > > > > ichsmb0: <Intel Sunrise Point-LP SMBus controller> port > > > > > > 0xefa0-0xefbf mem > > > > > > 0xe8253000-0xe82530ff at device 31.4 on pci0 em0: <Intel(R) I219-V > > > > > > SPT(4)> mem > > > > > > 0xe8200000-0xe821ffff at device 31.6 on pci0 em0: EEPROM V0.1-3 > > > > > > em0: Using 1024 TX descriptors and 1024 RX descriptors > > > > > > em0: Using an MSI interrupt > > > > > > em0: Ethernet address: 48:2a:e3:3a:cf:52 > > > > > > em0: netmap queues/slots: TX 1/1024, RX 1/1024 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- A FreeBSD user
rc.conf
Description: Binary data
ADDON-HERMANN
Description: Binary data
HERMANN
Description: Binary data
NODEVICE-HERMANN
Description: Binary data
pgpfji6kSzVyB.pgp
Description: OpenPGP digital signature
