Hello all, i use jails for some testing, but i can not seem to make it
stable.
I use vnet jails with a bridge but when i put some load on it, some
jails loose there network connectivity.
My setup is as follows, haproxy internal IP 10.233.185.20 using binat to
make it Public accessable.
Then a varnish jail, and two web servers al on the 10.233.185.x range.
If i give it a little load with hey (hey -h2 -n 10 -c 20 -z 60s
https://wp.test.nl) than within the test the haproxy jail is not
reachable anymore it is not pingable from the host machine, and from the
other jails. restarting the jails solves it, if i leave the system alone
for some time i saw the varnish jail become unresponsive.
If i do a tcpdump on the epair${name}a interface i do see the packages
from the host machine to the jail but the jail itself is not reachable.
There is nothing in the logs from the host and the jail itself, i can
ping the jails ip adres from the jail itself.
I do not think i have a special setup, but i could be doing something wrong.
my jail.conf
# Global settings applied to all jails.
$domain = "test.nl";
$subdomain = "";
exec.start = "/bin/sh /etc/rc";
exec.stop = "/bin/sh /etc/rc.shutdown";
exec.clean;
mount.fstab = "/storage/jails/$name.fstab";
exec.system_user = "root";
exec.jail_user = "root";
mount.devfs;
sysvshm="new";
sysvsem="new";
allow.raw_sockets;
allow.set_hostname = 0;
allow.sysvipc;
enforce_statfs = "2";
devfs_ruleset = "11";
path = "/storage/jails/${name}";
host.hostname = "${name}${subdomain}.${domain}";
# Networking
$uplinkdev = "vtnet1";
$epid = "${ip}";
$subnet = "10.233.185.";
$cidr = "/24";
$ipv4_addr = "${subnet}${ip}${cidr}";
vnet;
vnet.interface = "vnet0";
$epair=epair${ip};
vnet;
#vnet.interface = "${epair}b"; # default vnet interface
exec.prestart = "ifconfig bridge0 > /dev/null 2>&1 || ( ifconfig
bridge0 create up && ifconfig bridge0 addm $uplinkdev )";
exec.prestart += "ifconfig ${epair} create up description
jail_${name} || echo 'Skipped creating epair (exists?)'";
exec.prestart += "ifconfig bridge0 addm ${epair}a || echo
'Skipped adding bridge member (already member?)'";
exec.created = "ifconfig ${epair}b name vnet0";
exec.start = "/bin/sh /etc/rc";
exec.consolelog = "/var/log/jail/$name.test.nl";
exec.stop = "/bin/sh /etc/rc.shutdown";
exec.poststop = "ifconfig bridge0 deletem ${epair}a";
exec.poststop += "ifconfig ${epair}a destroy";
varnish01 {
$ip = 16;
mount.fstab = "";
path = "/storage/jails/${name}";
}
web01 {
$ip = 18;
}
web02 {
$ip = 19;
}
haproxy {
$ip = 20;
mount.fstab = "";
path = "/storage/jails/${name}";
}
My ifconfig
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 58:9c:fc:10:ff:82
inet 10.233.185.1 netmask 0xffffff00 broadcast 10.233.185.255
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: epair20a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 13 priority 128 path cost 2000
member: epair19a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 53 priority 128 path cost 2000
member: epair18a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 48 priority 128 path cost 2000
member: epair16a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 28 priority 128 path cost 2000
groups: bridge
nd6 options=9<PERFORMNUD,IFDISABLED>
epair16a: flags=8963<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
description: jail_varnish01
options=8<VLAN_MTU>
ether 02:76:32:8e:0e:0a
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair18a: flags=8963<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
description: jail_web01
options=8<VLAN_MTU>
ether 02:6d:be:b8:36:0a
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair19a: flags=8963<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
description: jail_web02
options=8<VLAN_MTU>
ether 02:54:fd:77:9a:0a
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
epair20a: flags=8963<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST>
metric 0 mtu 1500
description: jail_haproxy
options=8<VLAN_MTU>
ether 02:f8:58:06:78:0a
groups: epair
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
This is on both 13-STABLE and 14-HEAD.
