Hi!
I was able to build and boot, starting from a February -CURRENT but there
are some oddities.
1. I had to disable linux emulation, as it caused system hangup
Yes I followed the hint on rebranding from src/UPDATING
2. My system seems to have a problem with fsck
I had to use the old February kernel to boot and fsck with it,
after the new kernel driven system crashed with the fs inconsistent
3. in the boot loader I miss the list of commands,
? (i hope this was the command) just yields a number
4. I thought I put just the sym driver in the kernel, why do I
see ncr? (see next item)
5. Here are the dmesg differences between the February and the new
kernel. Could you explain the unassigned resources messages
to me?
+Setting atkbd 0 at to atkbdc (string)
+Setting atkbd 0 irq to 1 (int)
+Setting atkbdc 0 at to isa (string)
+Setting atkbdc 0 port to 96 (int)
+Setting fd 0 at to fdc0 (string)
+Setting fd 0 drive to 0 (int)
+Setting fdc 0 at to isa (string)
+Setting fdc 0 drq to 2 (int)
+Setting fdc 0 irq to 6 (int)
+Setting fdc 0 port to 1008 (int)
+Setting isic 0 at to isa (string)
+Setting isic 0 flags to 3 (int)
+Setting isic 0 irq to 5 (int)
+Setting isic 0 port to 3456 (int)
+Setting joy 0 at to isa (string)
+Setting joy 0 port to 513 (int)
+Setting lpt 0 at to ppbus (string)
+Setting npx 0 at to nexus (string)
+Setting npx 0 flags to 0 (int)
+Setting npx 0 irq to 13 (int)
+Setting npx 0 port to 240 (int)
+Setting ppc 0 at to isa (string)
+Setting ppc 0 irq to 7 (int)
+Setting sc 0 at to isa (string)
+Setting sio 0 at to isa (string)
+Setting sio 0 flags to 16 (int)
+Setting sio 0 irq to 4 (int)
+Setting sio 0 port to 1016 (int)
+Setting vga 0 at to isa (string)
+FreeBSD 5.0-CURRENT #15: Thu Jun 15 00:25:51 CEST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/ORANJE
Timecounter "i8254" frequency 1193182 Hz
-Timecounter "TSC" frequency 300684682 Hz
-CPU: AMD-K6tm w/ multimedia extensions (300.68-MHz 586-class CPU)
+Timecounter "TSC" frequency 300685025 Hz
+CPU: AMD-K6tm w/ multimedia extensions (300.69-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x570 Stepping = 0
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
AMD Features=0x400<<b10>>
real memory = 201326592 (196608K bytes)
-avail memory = 191733760 (187240K bytes)
-Preloaded elf kernel "kernel" at 0xc030d000.
-VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02b3602 (1000022)
+avail memory = 192716800 (188200K bytes)
+Preloaded elf kernel "kernel" at 0xc032c000.
+VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc02cd122 (1000022)
VESA: NVidia
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
+pci0: <Host to PCI bridge (vendor=1039 device=5597)> at 0.0
isab0: <SiS 85c503 PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <SiS 5591 ATA33 controller> irq 0 at device 1.1 on pci0
@@ -25,30 +55,42 @@
atapci1: <HighPoint HPT366 ATA66 controller> port
0x6500-0x65ff,0x6400-0x6403,0x6300-0x6307 irq 15 at device 11.0 on pci0
ata2: at 0x6300 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port
0x6800-0x68ff,0x6700-0x6703,0x6600-0x6607 irq 15 at device 11.1 on pci0
-sym0: <875> port 0x6900-0x69ff mem 0xe2000000-0xe2000fff,0xe2002000-0xe20020ff
irq 11 at device 13.0 on pci0
-sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
+ncr0: <ncr 53c875 fast20 wide scsi> port 0x6900-0x69ff mem
0xe2000000-0xe2000fff,0xe2002000-0xe20020ff irq 11 at device 13.0 on pci0
pcm0: <AudioPCI ES1370> port 0x6a00-0x6a3f irq 10 at device 15.0 on pci0
-pci0: NVidia Riva TNT graphics accelerator (vendor=0x10de, dev=0x0020) at 17.0
irq 9
-atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
+pci0: <NVidia Riva TNT graphics accelerator> at 17.0 irq 9
+atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
-vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
-sc0: <System console> on isa0
-sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
-sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
-sio0: type 16550A
-joy0 at port 0x201 on isa0
-isic0 at port 0xd80,0x960-0x99f,0x160-0x19f,0x560-0x59f irq 5 flags 0x3 on isa0
+isic0 at port 0xd80-0xd9f,0x980-0x99f,0x180-0x19f,0x580-0x59f irq 5 flags 0x3 on
isa0
isic0: Teles S0/16.3
-ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
+joy0 at port 0x201 on isa0
+ppc0: This ppc chipset does not support the extended I/O port range...no problem
+ppc0: <Parallel port> at port 0x378-0x37b irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
-ppbus0: IEEE1284 device found /NIBBLE
-Probing for PnP devices on ppbus0:
-ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
+sc0: <System console> on isa0
+sc0: VGA <16 virtual consoles, flags=0x200>
+sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
+sio0: type 16550A
+vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
+unknown: <PNP0000> can't assign resources
+unknown: <PNP0200> can't assign resources
+unknown0: <PNP0100> at port 0x40-0x43 irq 0 on isa0
+unknown1: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
+unknown: <PNP0303> can't assign resources
+unknown2: <PNP0800> at port 0x61 on isa0
+npxisa0: <Legacy ISA coprocessor support> at port 0xf0-0xff irq 13 on isa0
+unknown3: <PNP0c01> at iomem
0xe0000-0xfffff,0-0x9ffff,0x20000000-0x203fffff,0xffee0000-0xffefffff,0xfffe0000-0xffffffff,0x100000-0xbffffff
on isa0
+unknown4: <PNP0a03> at port 0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f on isa0
+unknown5: <PNP0c02> at port 0x6100-0x613f on isa0
+unknown: <PNP0501> can't assign resources
+unknown: <PNP0700> can't assign resources
+unknown: <PNP0400> can't assign resources
+sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
+sio1: type 16550A
i4b: ISDN call control device attached
i4bisppp: 4 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
@@ -59,19 +101,19 @@
ad0: 26059MB <Maxtor 92732U8> [52946/16/63] at ata2-master using UDMA66
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s2a
-cd0 at sym0 bus 0 target 6 lun 0
-cd0: <PIONEER CD-ROM DR-U12X 1.06> Removable CD-ROM SCSI-2 device
-cd0: 10.000MB/s transfers (10.000MHz, offset 15)
-cd0: cd present [355510 x 2048 byte records]
-da0 at sym0 bus 0 target 0 lun 0
+cd0 at ncr0 bus 0 target 4 lun 0
+cd0: <PIONEER DVD-ROM DVD-303 1.10> Removable CD-ROM SCSI-2 device
+cd0: 20.000MB/s transfers (20.000MHz, offset 8)
+cd0: cd present [2134336 x 2048 byte records]
+da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM FIREBALL ST2.1S 0F0C> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 2068MB (4235629 512 byte sectors: 255H 63S/T 263C)
-da1 at sym0 bus 0 target 1 lun 0
+da1 at ncr0 bus 0 target 1 lun 0
da1: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit)
da1: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
-da2 at sym0 bus 0 target 2 lun 0
+da2 at ncr0 bus 0 target 2 lun 0
da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
Thanks for the work,
Marc
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
