On 0505T1847, Graham Menhennitt wrote:
> On 3/05/2016 07:59 PM, Edward Tomasz Napierała wrote:
> > On 0503T1922, Graham Menhennitt wrote:
> >> On 3/05/2016 06:42 PM, Edward Tomasz Napierała wrote:
> >>> On 0502T0643, Graham Menhennitt wrote:
> >>>> On 30/04/2016 06:53 PM, Graham Menhennitt wrote:
> >>>>> Hi all,
> >>>>>
> >>>>> I have a USB disk that I use for backup. Up till now, it's mounted
> >>>>> without any problems at boot time. After updating to -current as of
> >>>>> yesterday, it doesn't mount and causes the boot to fail.
> >>>>>
> >>>>> My /etc/fstab looks like:
> >>>>>
> >>>>> # Device Mountpoint FStype Options Dump Pass#
> >>>>>
> >>>>> /dev/ada0s1a / ufs rw 1 1
> >>>>> /dev/ada0s1b none swap sw 0 0
> >>>>> /dev/da0a /backup ufs rw,late 1 1
> >>>>>
> >>>>>
> >>>>> I tried adding the "late" to fix the problem, but it doesn't help.
> >>>>>
> >>>>> The error message is:
> >>>>>
> >>>>> /dev/ada0s1a: clean...
> >>>>> Can't stat /dev/da0a: No such file or directory
> >>>>> Unknown error; help!
> >>>>> ERROR: ABORTING BOOT (sending SIGTERM to parent)!
> >>>>>
> >>>>>
> >>>>> (hand transcribed - maybe typos)
> >>>>>
> >>>>> Can anybody help, please.
> >>>>>
> >>>>> Thanks,
> >>>>> Graham
> >>>> Sorry, I forgot to mention...
> >>>>
> >>>> I commented out that line from fstab which allows the boot to complete.
> >>>> I can then manually mount it without any problems. It looks like the
> >>>> device doesn't get created early enough.
> >>> Have you run mergemaster after upgrade? In particular, do you have
> >>> the current version of /etc/rc.d/mountcritlocal?
> >>>
> >> Thanks for replying, Edward. Yes I've installed that file. The delay
> >> that Dave told me about has fixed the problem.
> > Still, it would be nice if this worked by default. The updated
> > mountcritlocal script should wait for USB to release root tokens
> > if the mount initially fails,
> >
> Ok, I tried to do a bit of diagnosis here. I took out the delay from
> /boot/loader.conf and I added "set -x" to the top of
> /etc/rc.d/mountcritlocal (before the start of the mountcritlocal_start()
> function definition). I then rebooted. I didn't see any shell command
> output from the "set -x" before the error occurred. That means that the
> error is happening before /etc/rc.d/mountcritlocal is being read.
>
> When I put the delay back in and boot, I see the shell commands after
> the filesystems are mounted (and, hence, after the error would have
> occurred if the delay wasn't there). So I don't think mountcritlocal is
> going to help me.
>
> I'm not sure what else to try. if you have any suggestions, I can do
> some experimenting. Is there a simple way to capture the output from the
> rc.d scripts?
Huh, you've nailed it - it was a different script, /etc/rc.d/fsck; it
runs before mountcritlocal. Could you try the following patch? You can
apply it directly to /etc/rc.d:
Index: etc/rc.d/fsck
===================================================================
--- etc/rc.d/fsck (revision 299115)
+++ etc/rc.d/fsck (working copy)
@@ -14,6 +14,35 @@ desc="Run file system checks"
start_cmd="fsck_start"
stop_cmd=":"
+# Originally, root mount hold had to be released before mounting
+# the root filesystem. This delayed the boot, so it was changed
+# to only wait if the root device isn't readily available. This
+# can result in this script executing before all the devices - such
+# as graid(8) - are available. Thus, should the mount fail,
+# we will wait for the root mount hold release and retry.
+root_hold_wait()
+{
+ waited=0
+ while true; do
+ holders="$(sysctl -n vfs.root_mount_hold)"
+ if [ -z "${holders}" ]; then
+ break;
+ fi
+ if [ ${waited} -eq 0 ]; then
+ echo -n "Waiting ${root_hold_delay}s" \
+ "for the root mount holders: ${holders}"
+ else
+ echo -n .
+ fi
+ if [ ${waited} -ge ${root_hold_delay} ]; then
+ echo
+ break
+ fi
+ sleep 1
+ waited=$(($waited + 1))
+ done
+}
+
fsck_start()
{
if [ "$autoboot" = no ]; then
@@ -31,7 +60,21 @@ fsck_start()
fsck -p
fi
- case $? in
+ err=$?
+ if [ ${err} -eq 3 ]; then
+ echo "Warning! Some of the devices might not be" \
+ "available; retrying"
+ root_hold_wait
+ check_startmsgs && echo "Restarting file system checks:"
+ if checkyesno background_fsck; then
+ fsck -F -p
+ else
+ fsck -p
+ fi
+ err=$?
+ fi
+
+ case ${err} in
0)
;;
2)
_______________________________________________
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
