Yeah, still getting the -100 error, I do have sendmail disabled. I just tested with sendmail up and running then add the VF's and it still shows the error message.
On Wed, Feb 24, 2016 at 8:04 PM, Eric Joyner <[email protected]> wrote: > Are you still getting the -100 errors when trying to load the VF driver? > > I've tried SR-IOV on a system here, and I can confirm that traffic stops > passing on the PF interface when you create a VF interface. That didn't > used to happen, so I'm investigating why that is right now. > > On Wed, Feb 24, 2016 at 8:09 AM Ultima <[email protected]> wrote: > >> Decided to do some more tests, I actually have a second board with sr-iov >> capabilities that I used for awhile with vmware esxi. I decided to test >> this out and unfortunately it won't activate, it is giving the no space >> left on device error message. I double checked bios and all VT-d related >> options are enabled and have hw.ix.num_queues="4" in /boot/loader.conf. Is >> there anything else that may need to be set? .(It did work on vmware) >> >> For my second test, I moved the X540-AT1 to the board with the X540-AT2. >> It functioned with the same issues as the AT2 tho. >> >> >> I don't think I listed the motherboards in question yet so ill list them >> now. >> >> S1200BTLRM - >> >> http://ark.intel.com/products/69633/Intel-Server-Board-S1200BTLRM?q=S1200BTLRM >> MD80-TM0 >> <http://ark.intel.com/products/69633/Intel-Server-Board-S1200BTLRM?q=S1200BTLRMMD80-TM0> >> - http://b2b.gigabyte.com/products/product-page.aspx?pid=5146#ov >> >> I'm not sure if it will be of any help tho. >> >> Ultima >> _______________________________________________ >> [email protected] mailing list >> https://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "[email protected] >> " >> > _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[email protected]"
