On 02/21/16 14:33, Dimitry Andric wrote:
If you ask me, something is just seriously broken in the way the xhci
driver works on Haswell or higher Intel CPUs. For example, on an
embedded Haswell box with USB3 ports:
Hi,
Nothing is seriously broken in the XHCI driver. Try to set:
hw.usb.xhci.xhci_port_route=0
Which will route all devices to the EHCI, in your /boot/loader.conf
Does it make any difference?
Refer to the following print:
> xhci0: Port routing mask set to 0xffffffff
The chipset you're using is special in that the binding of ports between
XHCI and EHCI is not fixed. Maybe some combinations are simply not
supported.
--HPS
_______________________________________________
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
