On 12/17/13 08:06, dan_partelly wrote: > > Hi all, > > I've set up wireless link aggregation on FreeBSD 10 RC1 and RC2 as > described in the FreeBSD handbook, on an oldish Compaq nc6320 laptop. > > What happens is: > > If I boot the system with the Ethernet cable attached, I correctly get > lagg0 active port on master- bg0- and the network is working correctly. > (I mainly test pinging my gateway). When I pull the cable out, lagg0 > device correctly switches to wlan0 as shown by ifconfig (wlan0 is created > from wpi0), but at the same time I get no more ping replies from my > gateway. I can leave the system in this state for several minutes as an > example > and no replies are coming through. A simple list of interfaces with > ifconfig with no parameters brigs the network back to life, and I start to > get back the due ping replyes, this time thrugh wireless link. > > > Please, if possible en-light me on tis problem. I sat at your disposition > with any info you may deem necessary to get this fixed (if it needs a fix). > > > Dan >
I can confirm this behavior. It also happens to me. - Nikolai Lifanov. _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
