Hi,
I've got FreeBSD 4.0 RELEASE running on a Compaq Deskpro with an Intel 810
motherboard. I'm running the machine as a POP3 server using Qmail's POP3D
daemon. For some unknown reason, the machine keeps rebooting every 3 - 4
hours. I'm not sure how to get it to log the details of the panic so I don't
have any trace of the problem.
I'd be grateful for pointers on how to debug the kernel panic or any
information relating to the Intel 810 motherboard. I've attached output
from dmesg.
Thanks,
Daniel.
---
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-RELEASE #3: Wed Apr 5 16:50:35 CAT 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/PUKU
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon (498.49-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory = 200278016 (195584K bytes)
avail memory = 190967808 (186492K bytes)
Preloaded elf kernel "kernel" at 0xc02f7000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82810E (i810E GMCH) SVGA controller> at 1.0 irq 11
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0x1000-0x10ff mem
0x40000000-0x400000ff irq 11 at device 13.0 on pci1
rl0: Ethernet address: 00:e0:29:5c:e5:48
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: supplying EUI64: 00:e0:29:ff:fe:5c:e5:48
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x2460-0x246f at device 31.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82801AA (ICH) USB controller> at 31.2 irq 11
chip1: <Intel 82801AA (ICH) AC'97 Audio Controller> port
0x2400-0x243f,0x2000-0x20ff irq 11 at device 31.5 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ad0: 4112MB <FUJITSU MPC3043AT> [8912/15/63] at ata0-master using UDMA33
ad1: 6149MB <WDC WD64AA> [13328/15/63] at ata0-slave using UDMA33
acd0: CDROM <LTN483> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
rl0: starting DAD for fe80:0001::02e0:29ff:fe5c:e548
rl0: DAD complete for fe80:0001::02e0:29ff:fe5c:e548 - no duplicates found
------------------------------------------------------------------------
Daniel Mpolokoso - Managing Director (Act.), Email: [EMAIL PROTECTED]
ZAMNET Communication Systems Limited, Phone: +260 - 1 - 763065
P.O. Box 38299, Lusaka, Zambia. Fax: +260 - 1 - 224775
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
