Luigi Rizzo wrote:
On Mon, Nov 05, 2012 at 04:25:36PM +0000, Joe Holden wrote:
Luigi Rizzo wrote:
On Mon, Nov 05, 2012 at 08:11:41AM -0500, Ryan Stone wrote:
On Mon, Nov 5, 2012 at 4:40 AM, Joe Holden <li...@rewt.org.uk> wrote:
doh, running kernel wasn't as GENERIC as I thought it was, looks like
device polling not only breaks dynamic ticks but also reduces rx ability
significantly, exactly 150,000 pps per 1000hz on igb versus 650,000
without
Is this a known issue? (and if device polling isn't as useful as it once
was, should it be removed?)
Device polling on modern multiqueue NICs isn't very useful because you're
limited to a single thread for handling packets. I have a patch that
fixes
this that I've let fall by the wayside.
the 150,000 is result of the combination of the default value of
sysctl kern.polling.burst_max and kern.polling.idle_poll=0
(i think this is the default value for the latter).
The 150 was sized for the peak pps on a 100Mbit/s interface,
back in 2001. You should at least be able to raise the number
and see what kind of throughput you can achieve.
This said, modern nics also have interrupt moderation so you
don't really need polling.
cheers
luigi
Hi Luigi,
This makes sense, am I likely to achieve better throughput (in the
forwarding path at this point) with netisr rather than polling,
especially as mentioned above the igb does indeed have multiple queues
for rx?
at 1Gbit/s you probably don't need multiqueue (I am actually surpised
you can only do 650kpps, but perhaps because you are using ipfw and
not just doing plain forwarding ?)
On another note, is netmap usable in the forwarding context at all as it
is rather awesome
It depends on what you need to do. If you have a v4/v6 router you
won't see any advantage (at the moment; there is some work in the
pipeline but probably it won't be available before spring).
If you just need to implement a firewall to protect the internal
network then it is another story and you can use the ipfw on netmap
that I posted in august.
cheers
luigi
Hi,
I have a setup where box1 is connected directly to box2 (igb0), with
pkt-gen however box2 doesn't seem to actually forward any packets,
sysctl -ip 1 shows 1.48Mpps unreachables generated (matching the input),
is there something specific I need to do to test forwarding?
Thanks,
Joe
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
