On Tuesday 12 April 2011 08:17:51 Alexander Motin wrote: > David Naylor wrote: > > I am running -current and since a few days ago (at least 2011/04/11) I am > > unable to boot. > > > > The boot process stops when it looks to find a bootable device. The > > prompt (when pressing '?') does not display any device and yielding one > > second (or more) to the kernel (by pressing '.') does not improve the > > situation. > > > > A known working date is 2011/02/20. > > > > I am running amd64 on a nVidia MCP51 chipset. > > MCP51... again... > > > I am willing to help any way I can. > > You could start from capturing and showing verbose dmesg. Full or at > least in parts related to disks.
I captured the dmesg output for both the old (working) kernel and the new (bad) kernel. See attached for the difference between the two. If you need the full dmesg please let me know. One thing I found is that the old kernel would not boot if I simply rebooted from the bad kernel. I had to do a hard power off before the old kernel would work again. Is some device state surviving between reboots? Regards, David
--- dmesg.old 2011-04-12 21:26:44.000000000 +0200
+++ dmesg.new 2011-04-12 21:24:12.000000000 +0200
@@ -16,17 +16,17 @@
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
-MADT: Found CPU APIC ID 3 ACPI ID 1: enabled
-SMP: Added CPU 3 (AP)
-MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
+MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
+MADT: Found CPU APIC ID 3 ACPI ID 2: enabled
+SMP: Added CPU 3 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 3: enabled
SMP: Added CPU 2 (AP)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
-FreeBSD 9.0-CURRENT #0: Mon Mar 7 17:47:26 SAST 2011
+FreeBSD 9.0-CURRENT #0: Tue Apr 12 21:09:23 SAST 2011
r...@dragon.dg:/tmp/home/freebsd9/src/sys/DRAGON amd64
Table 'FACP' at 0xcfff30c0
Table 'HPET' at 0xcfff7940
@@ -35,25 +35,24 @@
Table 'SSDT' at 0xcfff7a40
Table 'SSDT' at 0xcfff7ff0
ACPI: No SRAT table found
-Preloaded elf kernel "/boot/dragon/kernel" at 0xffffffff819ce000.
-Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff819ce1d0.
-Preloaded elf obj module "/boot/dragon/geom_sched.ko" at 0xffffffff819ce7c0.
-Preloaded elf obj module "/boot/dragon/gsched_rr.ko" at 0xffffffff819cee70.
-Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff819cf3e0.
-Calibrating TSC clock ... TSC clock: 2400024582 Hz
-CPU: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (2400.02-MHz K8-class CPU)
+Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81a01000.
+Preloaded elf obj module "/boot/modules/cuse4bsd.ko" at 0xffffffff81a011d0.
+Preloaded elf obj module "/boot/kernel/geom_sched.ko" at 0xffffffff81a017c0.
+Preloaded elf obj module "/boot/kernel/gsched_rr.ko" at 0xffffffff81a01e70.
+Preloaded elf obj module "/boot/modules/nvidia.ko" at 0xffffffff81a023e0.
+CPU: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz (K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f7 Family = 6 Model = f Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
- TSC: P-state invariant
real memory = 6442450944 (6144 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
-0x0000000001a01000 - 0x00000000c34d3fff, 3249352704 bytes (793299 pages)
+0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
+0x0000000001a34000 - 0x00000000c34d3fff, 3249143808 bytes (793248 pages)
0x0000000100000000 - 0x00000001affeffff, 2952724480 bytes (720880 pages)
-avail memory = 6161305600 (5875 MB)
+avail memory = 6162554880 (5877 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <GBT NVDAACPI>
INTR: Adding local APIC 1 as a target
@@ -65,14 +64,14 @@
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
+APIC: CPU 0 has ACPI ID 0
+APIC: CPU 1 has ACPI ID 1
+APIC: CPU 2 has ACPI ID 3
+APIC: CPU 3 has ACPI ID 2
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff800002a000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
-APIC: CPU 0 has ACPI ID 0
-APIC: CPU 1 has ACPI ID 2
-APIC: CPU 2 has ACPI ID 3
-APIC: CPU 3 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
@@ -99,12 +98,12 @@
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
-lapic3: Routing NMI -> LINT1
-lapic3: LINT1 trigger: edge
-lapic3: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
+lapic3: Routing NMI -> LINT1
+lapic3: LINT1 trigger: edge
+lapic3: LINT1 polarity: high
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: edge
lapic2: LINT1 polarity: high
@@ -114,10 +113,9 @@
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
Cuse4BSD v0.1.13 @ /dev/cuse
-wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
-null: <null device, zero device>
+wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
kbd: new array size 4
kbd1 at kbdmux0
@@ -161,6 +159,7 @@
VESA: NVIDIA
VESA: NVIDIA Corporation G73 Board - p345h0 Chip Rev
io: <I/O>
+null: <null device, zero device>
GEOM_SCHED: Modevent 0.
GEOM_SCHED: Initializing global data.
GEOM_SCHED: Loaded module rr error 0.
@@ -452,6 +451,7 @@
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
+pcib0: Enabling MSI window for HyperTransport slave at pci0:0:9:0
found-> vendor=0x10de, dev=0x0270, revid=0xa2
domain=0, bus=0, slot=9, func=0
class=05-00-00, hdrtype=0x00, mfdev=0
@@ -490,13 +490,13 @@
pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.APCF:0)
pci_link28: Picked IRQ 21 with weight 0
pcib0: slot 11 INTA routed to irq 21 via \_SB_.PCI0.APCF
-
found-> vendor=0x10de, dev=0x026e, revid=0xa3
domain=0, bus=0, slot=11, func=1
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
intpin=b, irq=10
+
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xe7006000, size 8, enabled
pcib0: matched entry for 0.11.INTB (src \_SB_.PCI0.APCL:0)
@@ -616,14 +616,14 @@
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
-ohci0: usbpf attached
+ohci0: usbpf: Attached
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe7006000-0xe70060ff irq 22 at device 11.1 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51
ehci0: Doorbell workaround enabled
usbus1: EHCI version 1.0
usbus1: <EHCI (generic) USB 2.0 controller> on ehci0
usbus1: bpf attached
-ehci0: usbpf attached
+ehci0: usbpf: Attached
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
@@ -737,7 +737,7 @@
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
-acpi0: wakeup code va 0xffffff81b14cd000 pa 0x4000
+acpi0: wakeup code va 0xffffff81a4d89000 pa 0x4000
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
@@ -777,8 +777,7 @@
Device configuration finished.
linprocfs registered
procfs registered
-Timecounter "TSC" frequency 2400024582 Hz quality -100
-lapic: Divisor 2, Frequency 133334705 Hz
+lapic: Divisor 2, Frequency 133332449 Hz
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
Linux ELF exec handler installed
@@ -791,24 +790,71 @@
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
-ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
-: ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA66 cable=40 wire
+: Loading: mp = 0xffffffff80c4f0c0, g_sched_class = 0xffffffff80c4f0c0.
+uhub0: 8 ports with 8 removable, self powered
+ata0: reiniting channel ..
+ata0: reset tp1 mask=03 ostat0=10 ostat1=58
+ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
+ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
+ata0: reset tp2 stat0=10 stat1=00 devices=0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0
+ata0: reiniting channel ..
+ata0: reset tp1 mask=03 ostat0=10 ostat1=58
+ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
+ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
+ata0: reset tp2 stat0=10 stat1=00 devices=0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0
+ata0: reiniting channel ..
+ata0: reset tp1 mask=03 ostat0=58 ostat1=00
+ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
+ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
+ata0: reset tp2 stat0=10 stat1=00 devices=0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0
+uhub1: 8 ports with 8 removable, self powered
+ata0: reiniting channel ..
+ata0: reset tp1 mask=03 ostat0=58 ostat1=00
+ata0: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
+ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
+ata0: reset tp2 stat0=10 stat1=00 devices=0x30000
+ata0: reinit done ..
+unknown: FAILURE - ATAPI_IDENTIFY timed out LBA=0
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
-Loading: mp = 0xffffffff80c1be60, g_sched_class = 0xffffffff80c1be60.ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
-
-ad4: setting UDMA100
-ad4: 305244MB <Seagate ST3320620AS 3.AAK> at ata2-master UDMA100 SATA 1.5Gb/s
-ad4: 625140335 sectors [620178C/16H/63S] 16 sectors/interrupt 1 depth queue
+ata2: reiniting channel ..
+ata2: SATA connect time=0ms status=00000113
+ata2: reset tp1 mask=01 ostat0=58 ostat1=00
+ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
+ata2: reset tp2 stat0=50 stat1=00 devices=0x1
+ata2: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
+ata2: reiniting channel ..
+ata2: SATA connect time=0ms status=00000113
+ata2: reset tp1 mask=01 ostat0=58 ostat1=00
+ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
+ata2: reset tp2 stat0=50 stat1=00 devices=0x1
+ata2: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
-GEOM: new disk ad4
-ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
-ad6: setting UDMA100
-ad6: 476938MB <Seagate ST3500413AS JC45> at ata3-master UDMA100 SATA 1.5Gb/s
-ad6: 976771055 sectors [969018C/16H/63S] 16 sectors/interrupt 1 depth queue
+ata3: reiniting channel ..
+ata3: SATA connect time=0ms status=00000113
+ata3: reset tp1 mask=01 ostat0=58 ostat1=00
+ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
+ata3: reset tp2 stat0=50 stat1=00 devices=0x1
+ata3: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
+ata3: reiniting channel ..
+ata3: SATA connect time=0ms status=00000113
+ata3: reset tp1 mask=01 ostat0=58 ostat1=00
+ata3: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
+ata3: reset tp2 stat0=50 stat1=00 devices=0x1
+ata3: reinit done ..
+unknown: FAILURE - ATA_IDENTIFY timed out LBA=0
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Realtek ALC888
hdac0: HDA Codec ID: 0x10ec0888
@@ -918,6 +964,7 @@
hdac0: Widget cap: 0x00000011
hdac0: STEREO
hdac0: Association: 0 (0x00000001)
+
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
@@ -957,7 +1004,6 @@
hdac0: PCM cap: 0x000e0560
hdac0: 16 20 24 bits, 44 48 96 192 KHz
hdac0:
-
hdac0: nid: 6
hdac0: Name: audio output
hdac0: Widget cap: 0x00000211
@@ -1419,6 +1465,7 @@
pcm0: PCM
pcm0: PCM cap: 0x000e0560
pcm0: 16 20 24 bits, 44 48 96 192 KHz
+
pcm0: DAC: 2 3 4 5
pcm0:
pcm0: Record:
@@ -1458,7 +1505,6 @@
pcm0:
pcm0: nid=23 [pin: Line-out (Grey Jack)]
pcm0: |
-
pcm0: + <- nid=15 [audio mixer] [src: pcm, mix]
pcm0: |
pcm0: + <- nid=5 [audio output] [src: pcm]
@@ -1575,8 +1621,8 @@
pcm0: Mixer "igain":
pcm0: Soft PCM mixer ENABLED
pcm0: clone manager: deadline=750ms flags=0x8000001e
-pcm0: sndbuf_setmap 49e0000, 4000; 0xffffff81b14db000 -> 49e0000
-pcm0: sndbuf_setmap 49f0000, 4000; 0xffffff81b14eb000 -> 49f0000
+pcm0: sndbuf_setmap 1aff90000, 4000; 0xffffff81a4d97000 -> 1aff90000
+pcm0: sndbuf_setmap 1affa0000, 4000; 0xffffff81a4da7000 -> 1affa0000
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm1: +--------------------------------------+
pcm1: | DUMPING PCM Playback/Record Channels |
@@ -1668,8 +1714,8 @@
pcm1: Mixer "monitor":
pcm1: Soft PCM mixer ENABLED
pcm1: clone manager: deadline=750ms flags=0x8000001e
-pcm1: sndbuf_setmap 4b10000, 4000; 0xffffff81b14fb000 -> 4b10000
-pcm1: sndbuf_setmap 4b20000, 4000; 0xffffff81b150b000 -> 4b20000
+pcm1: sndbuf_setmap 1affb0000, 4000; 0xffffff81a4db7000 -> 1affb0000
+pcm1: sndbuf_setmap 49f0000, 4000; 0xffffff81a4dc7000 -> 49f0000
pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm2: +--------------------------------------+
pcm2: | DUMPING PCM Playback/Record Channels |
@@ -1717,18 +1763,18 @@
pcm2: Mixer "pcm": parent="vol"
pcm2: Soft PCM mixer ENABLED
pcm2: clone manager: deadline=750ms flags=0x8000001e
-pcm2: sndbuf_setmap 4b30000, 4000; 0xffffff81b151b000 -> 4b30000
-pcm2: sndbuf_setmap 4b50000, 4000; 0xffffff81b152b000 -> 4b50000
-SMP: AP CPU #2 Launched!
-cpu2 AP:
- ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
+pcm2: sndbuf_setmap 47c0000, 4000; 0xffffff81a4dd7000 -> 47c0000
+pcm2: sndbuf_setmap 47d0000, 4000; 0xffffff81a4de7000 -> 47d0000
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
+SMP: AP CPU #2 Launched!
+cpu2 AP:
+ ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
+ lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
+ timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
@@ -1742,114 +1788,29 @@
nioapic0: routing intpin 16 (ePCI IRQ 16r) to lapic 3 vector 49
ioapic0: routing intpin 20 (sPCI IRQ 20t) to lapic 1 vector 50
aioapic0: routing intpin 21 (rPCI IRQ 21t) to lapic 2 vector 50
-eioapic0: routing intpin 22 (dPCI IRQ 22
-) to lapic 3 vector 50
-unknown: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
-(probe0:ata0:0:0:unknown: 0): FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 uhub0: sks=0x48 0x00 0x01
-8 ports with 8 removable, self powered
-SCSI status error
-GEOM: new disk ad6
-(probe0:ata0:0:0:0): INQUIRY. CDB: 12 1 0 0 ff 0
-(probe0:ata0:0:0:0): CAM status: SCSI Status Error
-(probe0:ata0:0:0:0): SCSI status: Check Condition
-(probe0:ata0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
-(probe0:ata0:0:0:0): Error 22, Unretryable error
-(probe0:ata0:0:0:0): Down reving Protocol Version from 2 to 0?
-(probe1:GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
-ata0:0:GEOM: ad4s1: media size does not match label.
-1:0): SCSI status error
-(probe1:ata0:0:1:0): INQUIRY. CDB: 12 1 0 0 ff 0
-(probe1:ata0:0:1:0): CAM status: SCSI Status Error
-(probe1:ata0:0:1:0): SCSI status: Check Condition
-(probe1:ata0:0:1:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB): Command byte 1 bit 0 is invalid
-(probe1:ata0:0:1:0): Error 22, Unretryable error
-(probe1:ata0:0:1:0): Down reving Protocol Version from 2 to 0?
-GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s).
-GEOM: ad6s1: media size does not match label.
-GEOM_MIRROR: Device mirror/gm0 launched (2/2).
-Root mount waiting for: usbus1
-(probe0:ata0:0:0:0): SCSI status error
-(probe0:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
-(probe0:ata0:0:0:0): CAM status: SCSI Status Error
-(probe0:ata0:0:0:0): SCSI status: Check Condition
-(probe0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
-(probe0:ata0:0:0:0): Error 6, Unretryable error
-GEOM: new disk cd0
-pass0 at ata0 bus 0 scbus0 target 0 lun 0
-pass0: <ASUS DRW-1814BL 1.13> Removable CD-ROM SCSI-0 device
-pass0: 3.300MB/s transfers
-uhub1: 8 ports with 8 removable, self powered
-(probe1:ata0:0:1:0): SCSI status error
-(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
-(probe1:ata0:0:1:0): CAM status: SCSI Status Error
-(probe1:ata0:0:1:0): SCSI status: Check Condition
-(probe1:ata0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, or bus device reset occurred)
-(probe1:ata0:0:1:0): Retrying command (per sense data)
-(cd0:ata0:0:0:0): SCSI status error
-(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd0:ata0:0:0:0): CAM status: SCSI Status Error
-(cd0:ata0:0:0:0): SCSI status: Check Condition
-(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
-(cd0:ata0:0:0:0): Error 6, Unretryable error
-cd0 at ata0 bus 0 scbus0 target 0 lun 0
-cd0: <ASUS DRW-1814BL 1.13> Removable CD-ROM SCSI-0 device
-cd0: 3.300MB/s transfers
-cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
-(probe1:ata0:0:1:0): SCSI status error
-(probe1:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
-(probe1:ata0:0:1:0): CAM status: SCSI Status Error
-(probe1:ata0:0:1:0): SCSI status: Check Condition
-(probe1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
-(probe1:ata0:0:1:0): Error 6, Unretryable error
-pass1 at ata0 bus 0 scbus0 target 1 lun 0
-pass1: <ASUS DRW-1608P3S 1.24> Removable CD-ROM SCSI-0 device
-pass1: 3.300MB/s transfers
-(cd1:ata0:0:1:0): SCSI status error
-(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd1:ata0:0:1:0): CAM status: SCSI Status Error
-(cd1:ata0:0:1:0): SCSI status: Check Condition
-(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
-(cd1:ata0:0:1:0): Error 6, Unretryable error
-cd1 at ata0 bus 0 scbus0 target 1 lun 0
-cd1: <ASUS DRW-1608P3S 1.24> Removable CD-ROM SCSI-0 device
-cd1: 3.300MB/s transfers
-cd1: Attempt to query device size failed: NOT READY, Medium not present
-(cd0:ata0:0:0:0): SCSI status error
-(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd0:ata0:0:0:0): CAM status: SCSI Status Error
-(cd0:ata0:0:0:0): SCSI status: Check Condition
-(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
-(cd0:ata0:0:0:0): Error 6, Unretryable error
-(cd0:ata0:0:0:0): SCSI status error
-(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd0:ata0:0:0:0): CAM status: SCSI Status Error
-(cd0:ata0:0:0:0): SCSI status: Check Condition
-(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
-(cd0:ata0:0:0:0): Error 6, Unretryable error
-(cd0:ata0:0:0:0): SCSI status error
-(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd0:ata0:0:0:0): CAM status: SCSI Status Error
-(cd0:ata0:0:0:0): SCSI status: Check Condition
-(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
-(cd0:ata0:0:0:0): Error 6, Unretryable error
-GEOM: new disk cd1
-(cd1:ata0:0:1:0): SCSI status error
-(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd1:ata0:0:1:0): CAM status: SCSI Status Error
-(cd1:ata0:0:1:0): SCSI status: Check Condition
-(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
-(cd1:ata0:0:1:0): Error 6, Unretryable error
-(cd1:ata0:0:1:0): SCSI status error
-(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd1:ata0:0:1:0): CAM status: SCSI Status Error
-(cd1:ata0:0:1:0): SCSI status: Check Condition
-(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
-(cd1:ata0:0:1:0): Error 6, Unretryable error
-(cd1:ata0:0:1:0): SCSI status error
-(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
-(cd1:ata0:0:1:0): CAM status: SCSI Status Error
-(cd1:ata0:0:1:0): SCSI status: Check Condition
-(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
-(cd1:ata0:0:1:0): Error 6, Unretryable error
+) to lap: routing intpin 22 (dPCI IRQ 22
+ ic 3 vector 50
Trying to mount root from ufs:/dev/mirror/gm0a [rw]...
-start_init: trying /sbin/init
+mountroot: waiting for device /dev/mirror/gm0a ...
+Mounting from ufs:/dev/mirror/gm0a failed with error 19.
+
+Loader variables:
+ vfs.root.mountfrom=ufs:/dev/mirror/gm0a
+ vfs.root.mountfrom.options=rw
+
+Manual root filesystem specification:
+ <fstype>:<device> [options]
+ Mount <device> using filesystem <fstype>
+ and with the specified (optional) option list.
+
+ eg. ufs:/dev/da0s1a
+ zfs:tank
+ cd9660:/dev/acd0 ro
+ (which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
+
+ ? List valid disk boot devices
+ . Yield 1 second (for background tasks)
+ <empty line> Abort manual input
+
+mountroot>
+
signature.asc
Description: This is a digitally signed message part.
