On Thu, 31 Mar 2011 23:44:03 -0700 (PDT) PseudoCylon <moonlightak...@yahoo.ca> wrote:
>> > > rt28600: <Ralink RT2790 PCIe> mem 0xf7f00000-0xf7f0ffff irq 17 at >> > > device 0.0 on pci3 >> > > rt28600: invalid EEPROM LNA gain #2: 0x00 >> > > rt28600: invalid EEPROM LNA gain #3: 0x00 >> > > rt28600: invalid EEPROM powersave level >> > > rt28600: MAC/BBP RT2860 (rev 0x28720200), RF RT3022 2.4G 2T2R >> > Wow, your device have same revision 0x28720200 like embedded into >> > RT3052F system on chip. >> > So now I understand, why driver won't work with your card. >> > I previously expect that this id related only for SoC version, but SoC >> > version don't have many things that PCI version have (MCU, EEPROM, >> > etc.) >> > >> >> Hi, >> >> I have 0x28720200 calling rt2872_rf_set_chan() instead of >> rt2860_rf_set_chan(). >> And, 0x2000 for initial RT2860_REG_MAX_LEN value in rt2860_init_locked(). >> >> If these are correct I can patch the driver up. Basic problem here is a usage external EEPROM data(instead read from real EEPROM) and direct BBP control(instead use MCU). So currently prefer to use Alexander Egorenkov version, until we done porting OpenBSD one and join it with ral(4) code. >> >> AK >> -- Alexandr Rybalko <r...@dlink.ua> aka Alex RAY <r...@ddteam.net> _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
