On 29 March 2011 02:12, Daniel O'Connor <docon...@gsoft.com.au> wrote: > > On 29/03/2011, at 8:29, Daniel O'Connor wrote: >> On 29/03/2011, at 1:37, Sergey Kandaurov wrote: >>> 1) ipv6_enable is obsolete in HEAD, see UPDATING. >> >> Ahh UPDATING, of course, thanks :) >> >>> 2) Normally hosts ignore rtadv packets if ipv6_gateway_enable is also >>> set (as per rfc4861). >>> All you need is something like ifconfig_em0_ipv6="inet6 accept_rtadv" >> >> Great, it works! > > I spoke a little too soon, I could not connect to a remote host until I did > some pings, eg.. > maarsy-acq:~>telnet -NK6 ipv6.google.com 80 > Trying 2404:6800:8004::68... > ^C > maarsy-acq:~>ping6 metatron > PING6(56=40+8+8 bytes) 2001:44b8:7c07:5581:225:90ff:fe32:91e --> > 2001:44b8:7c07:5581:204:61ff:fe79:276f > 16 bytes from 2001:44b8:7c07:5581:204:61ff:fe79:276f, icmp_seq=0 hlim=64 > time=0.507 ms > 16 bytes from 2001:44b8:7c07:5581:204:61ff:fe79:276f, icmp_seq=1 hlim=64 > time=0.247 ms > ^C > --- metatron.gsoft.com.au ping6 statistics --- > 2 packets transmitted, 2 packets received, 0.0% packet loss > round-trip min/avg/max/std-dev = 0.247/0.377/0.507/0.130 ms > > maarsy-acq:~>telnet -NK6 ipv6.google.com 80 > Trying 2404:6800:8004::68... > Connected to ipv6.l.google.com. > Escape character is '^]'. > ^] > telnet> q > > This is repeatable after a reboot, I haven't experienced with FreeBSD 8.x. >
I would assume an NDP communication problem or some such, it would be interesting to see this sort of traffic, also ifconfig and ndp -a output. -- wbr, pluknet _______________________________________________ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
