Is it possible to get AHCI working on this controller:
atap...@pci0:0:31:2: class=0x01018f card=0x72101462 chip=0x27c08086
rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage
Controller'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xe880, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xe800, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xe480, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xe400, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xe080, size 16, enabled
cap 01[70] = powerspec 2 supports D0 D3 current D0
BIOS show that AHCI 1.0 supported.
I tried this patch with no success:
--- sys/dev/ahci/ahci.c (revision 217301)
+++ sys/dev/ahci/ahci.c (working copy)
@@ -129,6 +129,7 @@
{0x26838086, 0x00, "Intel ESB2", 0},
{0x27c18086, 0x00, "Intel ICH7", 0},
{0x27c38086, 0x00, "Intel ICH7", 0},
+ {0x27c08086, 0x00, "Intel ICH7", 0},
{0x27c58086, 0x00, "Intel ICH7M", 0},
{0x27c68086, 0x00, "Intel ICH7M", 0},
{0x28218086, 0x00, "Intel ICH8", 0},
from dmesg with this patch:
device_attach: ahci0 attach returned 6
--
WBR,
Anton Yuzhaninov
_______________________________________________
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
