Hi,
I've installed 4.0-19990527-SNAP on some machines for testing.
The system runs fine, but has some problems when trying to reboot.
The system panics when starting to mount the file systems. It
then prints out some information about the panic, and proceeds
to panic a 2nd time and reboot. This happens so fast I cannot
read the information.
After the system has panic'd the 2nd time, the system reboots
and fscks the file systems at which point everything comes up
ok. I wonder if/how something is being/not being written to
disk which causes the system to panic, and is fixed via the fsck.
This happenned about 6 times today out of 20 reboots.
I have rebuilt the kernel with debug and will attempt to
replicate the problem with the current snap on the machine, and
with todays/tonights snap on a 2nd machine.
If anyone has any ideas about what might be going on here, I'd
appreciate any pointers.
I've included some dmesg output below.
Thanks!
John
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-19990527-SNAP #0: Mon Jan 10 15:16:54 EST 2000
r...@bb01t02.unx.sas.com:/usr/src/sys/compile/BBKERN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 264887824 Hz
CPU: Pentium II (264.89-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x633 Stepping=3
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 134217728 (131072K bytes)
sio0: system console
avail memory = 127418368 (124432K bytes)
Preloaded elf kernel "kernel" at 0xc02ee000.
Pentium Pro MTRR support enabled, default memory type is uncacheable
ccd0-3: Concatenated disk drivers
Probing for PnP devices:
CSN 1 Vendor ID: CSC6835 [0x3568630e] Serial 0xffffffff Comp ID: @@@0000
[0x00000000]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <PCI host bus adapter> on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82443LX host to PCI bridge> at device 0.0 on pci0
pcib1: <Intel 82443LX PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <ATI model 4744 graphics accelerator> at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 7.1 on pci0
chip1: <Intel 82371AB Power management controller> at device 7.3 on pci0
ti0: <Alteon AceNIC Gigabit Ethernet> irq 11 at device 13.0 on pci0
ti0: Ethernet address: 00:60:cf:20:22:60
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 10 at device 14.0 on pci0
fxp0: Ethernet address 00:a0:c9:8b:09:7f
xl0: <3Com 3c905-TX Fast Etherlink XL> irq 11 at device 17.0 on pci0
xl0: Ethernet address: 00:c0:4f:ac:72:7f
xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <QUANTUM FIREBALL ST6.4A>
wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> on isa0
sc0: <System console> on isa0
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
changing root device to wd0s1a
To Unsubscribe: send mail to majord...@freebsd.org
with "unsubscribe freebsd-current" in the body of the message
