After make world this morning I received this panic : Fatal trap 12: page fault while in kernel mode fault virtual address = 0x14 fault code = supervisor read, page not present instruction pointer = 0x8:0xc0155ca4 stack pointer = 0x10:0xc6864d64 frame pointer = 0x10:0xc6864d78 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume , IOPL=0 current process = 374 (screen-3.7.6) interrupt mask = tty trap number = 12 panic: page fault
I receive this panic with "screen", but before I kept this box resetting itself trying to enter in X... and I was trying Xfree 3.3.3.1 (recompiled and reinstalled) SVGA, Metrolink and Xaccel 5.0 . But I could not seen the panic probably due to X loading. Here are some infos : Copyright (c) 1992-1999 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #0: Wed May 12 13:03:16 CEST 1999 r...@gmarco.eclipse.org:/usr/src/sys/compile/GMARCO Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 400911064 Hz CPU: Pentium II/Xeon/Celeron (400.91-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping=1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR> real memory = 134217728 (131072K bytes) avail memory = 127868928 (124872K bytes) Preloaded elf kernel "kernel" at 0xc02ae000. Pentium Pro MTRR support enabled, default memory type is uncacheable Probing for PnP devices: CSN 1 Vendor ID: CTL00c5 [0xc5008c0e] Serial 0x1a3b72f5 Comp ID: PNPb02f [0x2fb0d041] npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <PCI host bus adapter> on motherboard pci0: <PCI bus> on pcib0 chip0: <Intel 82443BX host to PCI bridge> at device 0.0 on pci0 pcib1: <PCI to PCI bridge (vendor=8086 device=7191)> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 vga-pci0: <VGA-compatible display device> irq 11 at device 0.0 on pci1 isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0 chip1: <Intel PIIX4 IDE controller> at device 4.1 on pci0 chip2: <Intel 82371AB Power management controller> at device 4.3 on pci0 ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 14 at device 6.0 on pci0 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs de0: <Digital 21041 Ethernet> irq 10 at device 10.0 on pci0 de0: 21041 [10Mb/s] pass 1.1 de0: address 00:40:05:36:7a:72 isa0: <ISA bus> on motherboard fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> at fdc0 drive 0 atkbdc0: <keyboard controller (i8042)> at port 0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> on isa0 sc0: <System console> on isa0 sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port de0: enabling 10baseT port Waiting 3 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 6 lun 0 sa0: <TANDBERG TDC 3500 =01:> Removable Sequential Access SCSI-2 device sa0: 3.300MB/s transfers changing root device to da0s1a da2 at ahc0 bus 0 target 2 lun 0 da2: <IOMEGA ZIP 100 E.08> Removable Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) da1 at ahc0 bus 0 target 1 lun 0 da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C) Kernel file : ######## Identification ####### machine "i386" cpu "I686_CPU" ident GMARCO maxusers 32 ######### Misc Options ######## options INET options FFS options NFS options PROCFS options FFS_ROOT options "COMPAT_43" options SCSI_DELAY=3000 options UCONSOLE options USERCONFIG options VISUAL_USERCONFIG options SOFTUPDATES options SYSVSHM options SYSVSEM options SYSVMSG ######### Controllers ########## controller isa0 controller pci0 controller pnp0 ######### Floppy Disk ########### controller fdc0 at isa? port IO_FD1 irq 6 drq 2 disk fd0 at fdc0 drive 0 ######### Scsi subsystem ######## controller ahc0 controller scbus0 device da0 device sa0 device cd0 ########## Keyboard and screen ### controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts device sc0 at isa? ######### Fpu #################### device npx0 at nexus? port IO_NPX irq 13 ########## Serials Devs ######### device sio0 at isa? port IO_COM1 irq 4 device sio1 at isa? port IO_COM2 irq 3 ########### Par bus ############### device ppc0 at isa? port? flags 0x40 irq 7 controller ppbus0 device lpt0 at ppbus? ########### Ether ################# device de0 ########### Luigi's drivers ####### device pcm0 at isa? port 0x220 irq ? drq ? flags 0x15 ########## Misc Device ############## pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip #################################### The box work normally with other tasks, but keep resetting if trying to enter in X or launching screen . Perhaps other things make it reset, but I don't find them till now ... Have I miss some "HEADS UP" ? Is it a fault only mine ? Thanks.... Best Regards, Gianmarco Giovannelli , "Unix expert since yesterday" http://www.giovannelli.it/~gmarco http://www2.masternet.it To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message