>Chris Piazza wrote: >> On 17-Apr-99 Brian Feldman wrote: >> > Both sound drivers are broken with the new-bus code. My SB16, in the old >> > driver, now gets recognized but sbxvi is never looked for. pcm0, the new >> > driver, never initializes with the new code :( >> > >> > device pcm0 at isa? port? tty irq 5 drq 1 flags 0x16 >> > >> >> The pcm0 sounddriver works for me. In fact, the only problem I had with new >> bus was it is now pcm0 instead of pcm1 ;-). >> >> es0: <AudioPCI ES1370> at device 9.0 on pci0 >> pcm0: using I/O space register mapping at 0xd800 >> es0: interrupting at irq 4 >> >> device pcm0 > >On two different systems it works for me using pcm0.. > >This is an ESS clone card: > >Probing for PnP devices: >CSN 1 Vendor ID: ESS1868 [0x68187316] Serial 0xffffffff Comp ID: PNPb02f [0x2f b0 >d041] >ESS1868 (rev 11) >pcm1 (ESS1868 <ESS1868> sn 0xffffffff) at 0x220-0x22f irq 5 drq 1 on isa > >This is an on-board Crystal SB-like PnP device: > >Probing for PnP devices: >CSN 1 Vendor ID: CSC0b36 [0x360b630e] Serial 0xffffffff Comp ID: @@@0000 [0x00 00 >0000] >mss_attach <CS4236>1 at 0x530 irq 5 dma 1:0 flags 0x10 >pcm1 (CS423x/Yamaha/AD1816 <CS4236> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 fl >ags 0x10 on isa > >For what it's worth, PnP has for the most part not been changed under >new-bus and is using the old mechanisms. The only significant risk is that >the attach code doesn't like what I've done with the emulation of >isa_device->id_id for "unit numbers".
I thought PnP was not even using new-bus yet?! I haven't used PnP in a long time, but the pcm driver is broke for me too. I have used the following successfully with just the plain isa0 for quite some time.. device pcm0 at isa? port? tty irq 5 drq 1 flags 0x10 >I'm sorry, you're going to need to have a bit of a look around and turning >on or inserting some debug code to see what's happening. Where should I start? It doesn't print out anything upon boot.. Chris To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message
