Sure enough when reading my own bug report, I found something else:

xl0: <3Com 3c905B Fast Etherlink XL 10/100BaseTX> rev 0x30 int a irq 9 on
pci0.3.0
xl0: command never completed!
xl0: Ethernet address: 00:50:04:11:5f:16
xl0: autoneg not complete, no carrier (forcing half-duplex, 10Mbps)
xl1: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 12 on
pci0.4.0
xl1: Ethernet address: 00:60:97:de:4e:38
xl1: autoneg complete, link status good (half-duplex, 10Mbps)

xl0 should be 100mbit  --> Not detected
xl1 should be 10mbit --> Detected

I switched the cards around, same thing happens.  But with only the 100mbit
network attached, it's detected fine.

Thanks again for any suggestions.

-----Original Message-----
From: RT <tr49...@rcc.on.ca>
To: curr...@freebsd.org <curr...@freebsd.org>
Date: Sunday, March 28, 1999 1:56 PM
Subject: 3com Nic Problems


>Heres are the nic combinations I've tried in one machine:
>
>3com 905 (at 100mbit) & 3com 905b (at 10mbit)
>3com 905b (at 100mbit) & 3com 905 (at 10mbit)
>3com 905 (at 100mbit) & realtek 8039 (at 10mbit)


-= Snip =-

>Any more information needed?




To Unsubscribe: send mail to majord...@freebsd.org
with "unsubscribe freebsd-current" in the body of the message

Reply via email to