On Wed, Feb 03, 1999 at 02:51:37PM +1030, Matthew Thyer wrote: > >I seem to have all the hardware required for querying the temperature >probes in the system (At least I can do it from the BIOS). > >How can I query this info ? > >I assume I need "controller smbus0" and "controller intpm0" in my >kernel. But do I also need "device smb0 at smbus?" and/or any >of the following: > ># ic i2c network interface ># iic i2c standard io ># iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
You need: controller intpm0 # the PIIX4 interface controller smbus0 # the SMBus system device smb0 at smbus? # user access to the SMBus > > >Once I have all this stuff in my kernel, what commands do I use to >query the probes ?? Takanori Watanabe <takaw...@shidahara1.planet.sci.kobe-u.ac.jp> as example code to do this. > >My system is FreeBSD 4.0-CURRENT (of CTM 3722 - but will soon be really >-CURRENT) > > >Extract from dmesg: > >chip0: <Host to PCI bridge (vendor=8086 device=7180)> rev 0x03 on >pci0.0.0 >chip1: <PCI to PCI bridge (vendor=8086 device=7181)> rev 0x03 on >pci0.1.0 >chip2: <Intel 82371AB PCI to ISA bridge> rev 0x01 on pci0.7.0 >ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 >chip3: <Intel 82371AB Power management controller> rev 0x01 on pci0.7.3 >-- > Matthew Thyer Phone: +61 8 8259 7249 > Corporate Information Systems Fax: +61 8 8259 5537 > Defence Science and Technology Organisation, Salisbury > PO Box 1500 Salisbury South Australia 5108 > >To Unsubscribe: send mail to majord...@freebsd.org >with "unsubscribe freebsd-current" in the body of the message > -- nso...@teaser.fr / nso...@freebsd.org FreeBSD - Turning PCs into workstations - http://www.FreeBSD.org To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message
