Greg et al, I added "flags 0x80ff" to my wd0 and wd1 lines (I don't have PCI IDE, but rather VLB, so the 0x4000 bit doesn't apply) :), was able to successfully get 32-bit mode and multiblock-16 out of both of my drives, and have been able to enable softupdates all around again without seeing any of my problems either. (I did re-cvsup -STABLE just before the kernel rebuild and did config -r to make sure everything was cleared out -- my old kernel was from the 20th, I believe.)
My previous test was simple -- tar zxvf samba-2.0.0.tar.gz. :) Just to see if maybe it was just because it was being faster, I also concurrently ran a chflags -R noschg /usr/obj;rm -rf /usr/obj on the same partition. I did see somewhat "pausy" activity, but it didn't actually hang. Now, we just have to figure out why 32-bit-mode is so special. :) I have access to a few other boxes; I'll get those set up and see what we can see. On Wed, 27 Jan 1999, Gregory Bond wrote: : Well stone the bloody crows. : : System: HP Kayak XA 440BX M/b, P-II, Quantum Fireball ex4.3a : : For months I've been running with no flags on either wdc0 or wd0. : Having followed the recent discussions about DMA mode etc I looked at : LINT and added "flags 0xa0ff" to wd0. Rebuilt the system using the : latest 3-Stable code, including Matt D.s VM fixes, and tried yet again : the test that has quite reliably frozen my system (softupdates enabled : on /usr/src, cd /usr/src/games, make) and, lo and behold, it worked. I : thought it was probably Matt's VM patches but (just to make sure) I : built a kernel without the wd flags and tried again. It failed. : : This seems to be saying the problem is the WD driver: When I have flags : on my disk, it all works; when I use the default, it fails (but only : on filesystems with softupdates activity...) : : Any ide_pci experts like me to try some more tests? : : Matt: I'm sorry I ever doubted the VM code or the softupdates! : : Probing for devices on PCI bus 0: : chip0: <Intel 82443BX host to PCI bridge> rev 0x02 on pci0.0.0 : chip1: <Intel 82443BX host to AGP bridge> rev 0x02 on pci0.1.0 : chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0 : ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1 : chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3 : [...] : wdc0 at 0x1f0-0x1f7 irq 14 on isa : wdc0: unit 0 (wd0): <QUANTUM FIREBALL EX4.3A>, DMA, 32-bit, multi-block-16 : wd0: 4104MB (8405775 sectors), 8895 cyls, 15 heads, 63 S/T, 512 B/S : wdc1 at 0x170-0x177 irq 15 on isa : wdc1: unit 0 (atapi): <CD-532E-A/2.0C>, removable, accel, ovlap, dma, iordis : acd0: drive speed 5512KB/sec, 128KB cache : acd0: supported read types: CD-R, CD-RW, CD-DA, packet track : acd0: Audio: play, 16 volume levels : acd0: Mechanism: ejectable tray : acd0: Medium: CD-ROM 120mm data disc loaded, unlocked : vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa : : Greg. : - Matt Behrens <m...@zigg.com> Network Administrator, zigg.com <http://www.zigg.com/> Engineer, Nameless IRC Network <http://www.nameless.net/> To Unsubscribe: send mail to majord...@freebsd.org with "unsubscribe freebsd-current" in the body of the message