I have 2 issues with 4.0-CURRENT. The first is the plethora of
"microuptime() went backwards..." errors that scroll on my console.
The second is that I have DDB compiled into my kernel (and a USB keyboard)
either on vga or serial console, if I trip DDB (control-shift-esc), I will
either get the ddb> prompt or the system will hard lock. Below is my
dmesg and kernel config. Help is appreciated.
-----<Start of "dmesg">-----
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Mon Feb 14 21:54:21 EST 2000
[EMAIL PROTECTED]:/usr/src/sys/compile/GEMINI
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (400.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 268423168 (262132K bytes)
config> pnp 1 1 os enable port0 0x534 port2 0x220 port3 0xe0d irq0 10 drq0 1 drq1 6
Invalid command or syntax. Type `?' for help.
avail memory = 256507904 (250496K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0369000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc036909c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga-pci0: <NVidia Riva TNT graphics accelerator> mem
0xe3000000-0xe3ffffff,0xe0000000-0xe0ffffff irq 16 at device 0.0 on pci1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ata-pci0: <Intel PIIX4 ATA-33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0 at 0x01f0 irq 14 on ata-pci0
ata1 at 0x0170 irq 15 on ata-pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 19 at device
4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
ukbd0: Microsoft Natural Keyboard Elite, rev 1.00/1.04, addr 3, iclass 3/1
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on
pci0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem
0xdf800000-0xdf800fff irq 19 at device 6.0 on pci0
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
xl0: <3Com 3c900-TPO Etherlink XL> port 0xb800-0xb83f irq 18 at device 10.0 on pci0
xl0: Ethernet address: 00:60:08:a9:db:e2
xl0: selecting 10baseT transceiver, half duplex
bktr0: <BrookTree 878> mem 0xe2000000-0xe2000fff irq 17 at device 11.0 on pci0
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
smbus0: <System Management Bus> on bti2c0
bktr0: Hauppauge Model 38061 B226
Hauppauge WinCast/TV, Philips NTSC tuner, remote control.
pci0: unknown card (vendor=0x109e, dev=0x0878) at 11.1 irq 17
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xb400-0xb4ff mem 0xdf000000-0xdf000fff
irq 16 at device 12.0 on pci0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
isa0: too many memory rangesfdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq
6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fd1: <1200-KB 5.25" drive> on fdc0 drive 1
WARNING: "fd" is usurping "fd"'s cdevsw[]
WARNING: "fd" is usurping "fd"'s bmaj
ata-isa0: already registered as ata0
ata-isa1: already registered as ata1
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ep0: <3Com 3C509-TPO EtherLink III> at port 0x310-0x31f irq 11 on isa0
ep0: Ethernet address 00:a0:24:12:8d:10
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown0: <PNP0c01> at iomem
0-0x9ffff,0x100000-0xfffffff,0xe8000-0xeffff,0xf0000-0xf3fff,0xf4000-0xfffff,0xd8000-0xdbfff,0xd4800-0xd7fff,0xfec00000-0xfec00fff
on isa0
unknown1: <PNP0000> at port 0x20-0x21,0xa0-0xa1,0x4d0-0x4d1 irq 2 on isa0
unknown2: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown3: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown4: <PNP0303> at port 0x60,0x64 irq 1 on isa0
unknown5: <PNP0c04> at port 0xf0 irq 13 on isa0
unknown6: <PNP0200> at port 0-0xf,0x80-0x90,0x94-0x9f,0xc0-0xde drq 4 on isa0
unknown7: <PNP0800> at port 0x61 on isa0
unknown8: <PNP0a03> at port 0xcf8-0xcff on isa0
unknown9: <PNP0c02> at port 0x290-0x297,0xe400-0xe43f,0xe800-0xe83f on isa0
unknown10: <AUX0> on isa0
pcm0: <OPTi931> at port 0x534-0x537,0x380-0x38b,0x220-0x22f,0xe0c-0xe0f irq 5 drq 0,1
on isa0
AD_WAIT_INIT FAILED 1002 0xff
unknown11: <Game Port> at port 0x200 on isa0
unknown12: <MPU401> at port 0x300-0x301 irq 9 on isa0
IP packet filtering initialized, divert enabled, rule-based forwarding disabled,
default to deny, unlimited logging
DUMMYNET initialized (000106)
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
ad0: 8297MB <Maxtor 90871U2> [16858/16/63] at ata0-master using UDMA33
ad2: 8297MB <Maxtor 90871U2> [16858/16/63] at ata1-master using UDMA33
ad3: 6149MB <WDC AC26400B> [13328/15/63] at ata1-slave using UDMA33
Mounting root from ufs:/dev/da0s1a
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [191167 x 2048 byte records]
da0 at ahc0 bus 0 target 0 lun 0
da0: <QUANTUM QM39100TD-SW N495> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8683MB (17783250 512 byte sectors: 255H 63S/T 1106C)
cd1 at ahc1 bus 0 target 6 lun 0
cd1: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device
cd1: 8.333MB/s transfers (8.333MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
WARNING: / was not properly dismounted
vinum: loaded
vinum: reading configuration from /dev/ad0s1h
vinum: updating configuration from /dev/ad2s1h
vinum: updating configuration from /dev/da0s1h
microuptime() went backwards (1565.4378301 -> 1565,092331)
microuptime() went backwards (1565.4378301 -> 1565,162116)
microuptime() went backwards (1565.4378301 -> 1565,231032)
-----<End of "dmesg">-----
-----<Start of "GEMINI">-----
machine i386
cpu I686_CPU
ident GEMINI
maxusers 256
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options NFS #Network Filesystem
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options SOFTUPDATES
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPDIVERT
options DUMMYNET
options DDB
options PNPBIOS
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
options NCPU=2 # number of CPUs
options NBUS=3 # number of busses
options NAPIC=1 # number of IO APICs
options NINTR=24 # number of INTs
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
device ahc # AHA2940 and onboard AIC7xxx devices
# SCSI peripherals
device scbus # SCSI bus (required)
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device vga0 at isa?
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? flags 0x20 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x30 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device ep
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device bpf #Berkeley packet filter
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device miibus
device bktr
device iicbus
device iicbb
device smbus
-----<End of "GEMINI">-----
Thanks
--
David Cross | email: [EMAIL PROTECTED]
Acting Lab Director | NYSLP: FREEBSD
Systems Administrator/Research Programmer | Web: http://www.cs.rpi.edu/~crossd
Rensselaer Polytechnic Institute, | Ph: 518.276.2860
Department of Computer Science | Fax: 518.276.4033
I speak only for myself. | WinNT:Linux::Linux:FreeBSD
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message