It is really a good idea to read the current mailing list
if you run current on your machine.
copy MAKEDEV from src/etc/MAKEDEV to /dev, and run it to recreate
your disk devices.
Poul-Henning
In message <[EMAIL PROTECTED]>, "Jeroen C. van Gelderen" writes
:
>Hi,
>
>I'm having some problems with my -CURRENT box. The problem as
>described has happened twice already but I cannot reproduce
>it reliably yet (have to wait for X to lock up).
>
>My system locked up solidly (no ping response) while in X so I
>had to reboot the box. Upon fsck I got the following messages:
>
> WARNING: / was not properly dismounted
> <fsck being run and seems doing okay, just normal messages>
> WARNING: R/W mount of / denied. Filesystem is not clean - run fsck
>
>I then drop into single user mode to run fsck manually and it
>simply succeeds, without any errors shown. If I subsequently
>try to mount R/W I again get the the complaint about the
>filesystem not being clean as seen above.
>
>I then tried fsck -b32 /, a couple of syncs and a reboot and the
>machine is happy now, apart from some filesystem corruption. (I
>had to boot an older kernel as /kernel was corrupt.)
>
>I ran a disk checker (the one provided in the Adaptec BIOS) and
>it doesn't find any problems on the the disk. Also, all cables
>are terminated properly and this configuration has worked for
>months without problems. I've never seen any SCSI related errors
>in my logs.
>
>Is this likely to be a hardware problem? If so, how come there is
>no messages in syslog? Could it be that one of the IDE drives has
>gone bad and this confuses the kernel?? I'd appreciate any clues
>as to how to approach this correctly.
>
>Cheers,
>Jeroen
>
>FreeBSD grolsch.ai 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Wed Dec 1
>08:27:42 GMT 1999
>
>[EMAIL PROTECTED]:/usr/src/sys/compile/DESKTOP i386
>Copyright (c) 1992-1999 The FreeBSD Project.
>Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights
>reserved.
>FreeBSD 4.0-CURRENT #0: Wed Dec 1 08:27:42 GMT 1999
> [EMAIL PROTECTED]:/usr/src/sys/compile/DESKTOP
>Timecounter "i8254" frequency 1193182 Hz
>CPU: Pentium II/Xeon/Celeron (450.46-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x651 Stepping = 1
>
>Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
>real memory = 268423168 (262132K bytes)
>avail memory = 257310720 (251280K bytes)
>Preloaded elf kernel "kernel" at 0xc02fc000.
>ccd0-3: Concatenated disk drivers
>Pentium Pro MTRR support enabled
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
>pci0
>pci1: <PCI bus> on pcib1
>vga-pci0: <NVidia Riva128 graphics accelerator> irq 11 at device 0.0 on
>pci1
>isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
>isa0: <ISA bus> on isab0
>ata-pci0: <Intel PIIX4 IDE controller> at device 4.1 on pci0
>ata-pci0: Busmastering DMA supported
>ata0 at 0x01f0 irq 14 on ata-pci0
>ata1 at 0x0170 irq 15 on ata-pci0
>pci0: UHCI USB controller (vendor=0x8086, dev=0x7112) at 4.2 irq 10
>chip1: <Intel 82371AB Power management controller> at device 4.3 on pci0
>ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> irq 10 at device 6.0 on
>pci0
>ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
>fxp0: <Intel EtherExpress Pro 10/100B Ethernet> irq 10 at device 9.0 on
>pci0
>fxp0: Ethernet address 00:90:27:88:b2:dc
>fxp0: supplying EUI64: 00:90:27:ff:fe:88:b2:dc
>atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0
>vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on
>isa0
>sc0: <System console> on isa0
>sc0: VGA <16 virtual consoles, flags=0x200>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>ad0: <ST36531A/3.05> ATA-4 disk at ata0 as master
>ad0: 6204MB (12706470 sectors), 13446 cyls, 15 heads, 63 S/T, 512 B/S
>ad0: 16 secs/int, 1 depth queue, UDMA33
>ad1: <ST36531A/3.05> ATA-4 disk at ata0 as slave
>ad1: 6204MB (12706470 sectors), 13446 cyls, 15 heads, 63 S/T, 512 B/S
>ad1: 16 secs/int, 1 depth queue, UDMA33
>ad2: <ST39140A/861000> ATA-3 disk at ata1 as master
>ad2: 8693MB (17803296 sectors), 17662 cyls, 16 heads, 63 S/T, 512 B/S
>ad2: 16 secs/int, 1 depth queue, UDMA33
>ad3: <ST39140A/841272> ATA-3 disk at ata1 as slave
>ad3: 8693MB (17803440 sectors), 17662 cyls, 16 heads, 63 S/T, 512 B/S
>ad3: 16 secs/int, 1 depth queue, UDMA33
>Mounting root from ufs:/dev/da0s1a
>da0 at ahc0 bus 0 target 0 lun 0
>da0: <SEAGATE ST39173W 5764> Fixed Direct Access SCSI-2 device
>da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
>Enabled
>da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
>fxp0: starting DAD for fe80:0001::0290:27ff:fe88:b2dc
>fxp0: DAD complete for fe80:0001::0290:27ff:fe88:b2dc - no duplicates
>found
>
># Device Mountpoint FStype Options Dump
>Pass#
>/dev/da0s1b none swap sw 0
>0
>/dev/da0s1a / ufs rw 1
>1
> ^^^^^^
> not running soft updates. the others do.
>/dev/da0s1f /tmp ufs rw 2
>2
>/dev/da0s1g /usr ufs rw 2
>2
>/dev/da0s1e /var ufs rw 2
>2
>/dev/wcd0c /cdrom cd9660 ro,noauto 0
>0
>/dev/ccd0c /mnt/ccd0 ufs rw 0
>2
>/dev/wd2s1e /mnt/wd2 ufs rw 0
>2
>/dev/wd3s1e /mnt/wd3 ufs rw,sync 0
>2
>proc /proc procfs rw 0
>0
>--
>Jeroen C. van Gelderen - [EMAIL PROTECTED]
>Interesting read: http://www.vcnet.com/bms/ JLF
>
>
>To Unsubscribe: send mail to [EMAIL PROTECTED]
>with "unsubscribe freebsd-current" in the body of the message
>
--
Poul-Henning Kamp FreeBSD coreteam member
[EMAIL PROTECTED] "Real hackers run -current on their laptop."
FreeBSD -- It will take a long time before progress goes too far!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
