Bob,
can you try to locate the symbols around 0xc01658e6 in your kernel ?
Also, when you end in the debugger, always type "trace" so we get
a stacktrace to look at.
Poul-Henning
In message <l03020906b465beae21a8@[194.32.164.2]>, Bob Bishop writes:
>Hi,
>
>cvsup at Sat Nov 27 04:02:41 GMT 1999, looks like it went in the middle of
>starting up SCSI devices. This box is not SMP and has a 2940UW, my SMP
>-current box with a plain 2940 doesn't do this.
>
>...
>da0 at ahc0 bus 0 target 0 lun 0
>da0: <IBM DCAS-34330W S65A> Fied Direct Access SCSI-2 device
>da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
>da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
>Fatal trap 12: page fault while in kernel mode
>fault virtual address = 0x2b
>da1 at ahc0 bus 0 target 1 lun 0
>da1: <IBM DDRS-34560D DC1B> Fixed Direct Access SCSI-2 device
>da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
>da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
>fault code = supervisor read, page not present
>instruction pointer = 0x8:0xc01658e6
>stack pointer = 0x10:0xc03a6f3c
>frame pointer = 0x10:0xc03a6f3c
>code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
>processor eflags = interrupt enable, resume, IOPL = 0
>current process = 0 (swapper)
>interrupt mask = none
>kernel: type 12 trap, code=0
>Stopped at devsw+0x6 cmpl $0, 0x2c(%eax)
>db>
>
>
>--
>Bob Bishop (0118) 977 4017 international code +44 118
>[EMAIL PROTECTED] fax (0118) 989 4254 between 0800 and 1800 UK
>
>
>
>
>To Unsubscribe: send mail to [EMAIL PROTECTED]
>with "unsubscribe freebsd-current" in the body of the message
>
--
Poul-Henning Kamp FreeBSD coreteam member
[EMAIL PROTECTED] "Real hackers run -current on their laptop."
FreeBSD -- It will take a long time before progress goes too far!
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
