Sorry to reply to my own mail -- never report problems before
investigating what was committed.
The $Id$ -> $FreeBSD$ changes to ifconfig are probably not the cause --
more likely the changes to xl (1.52 -> 1.53), and the addition of the
mii-controller. Anybody else seeing this, or should I look somewhere
else alltogether?
> Hi,
>
> After the recent changes to ifconfig and the xl driver I am getting
> a panic when rc.network runs ifconfig:
>
> [...]
> Doing initial network setup: hostname.
> UP,LOOPBACK,RUNN
> ING,MULTICAST> m
> E®Wio•Fnetmask 0xff0000a00
> tal trap 12: page fault while in kernel mode
> fault virtual address = 0x0
> fault code = supervisor read, page not present
> instruction pointer = 0x8:0x0
> stack pointer = 0x10:0xc8d18dc4
> frame pointer = 0x10:0xc8d18ddc
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 78 (ifconfig)
> interrupt mask = net
> kernel: type 12 trap, code=0
> Stopped at 0:
>
> Fatal trap 12: page fault while in kernel mode
> fault virtual address = 0x0
> fault code = supervisor read, page not present
> instruction pointer = 0x8:0xc020cac4
> stack pointer = 0x10:0xc8d18c3c
> frame pointer = 0x10:0xc8d18c40
> code segment = base 0x0, limit 0xfffff, type 0x1b
> = DPL 0, pres 1, def32 1, gran 1
> processor eflags = interrupt enabled, resume, IOPL = 0
> current process = 78 (ifconfig)
> interrupt mask = net
> kernel: type 12 trap, code=0
> db>
>
> This is after a make buildworld/installworld on -current (as of today).
>
> dmesg and config-file:
>
>
> FreeBSD/i386 bootstrap loader, Revision 0.7 639/65472kB
> ([EMAIL PROTECTED], Mon Aug 30 10:58:22 CEST 1999)
> /kernel text=0x164b84 data=0x1ee6c+0x1e1e8
> syms=[0x4+0x24760+0x4+0x268f8]
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [kernel]...
> Copyright (c) 1992-1999 The FreeBSD Project.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights
> reserved.
> FreeBSD 4.0-CURRENT #0: Mon Aug 30 18:56:22 CEST 1999
> [EMAIL PROTECTED]:/usr/src/sys/compile/HOME
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium II/Xeon/Celeron (400.90-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x652 Stepping = 2
>
>
>Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
> real memory = 134217728 (131072K bytes)
> avail memory = 127102976 (124124K bytes)
> Preloaded elf kernel "kernel" at 0xc02ef000.
> VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc029d042 (1000022)
> VESA: ATI MACH64
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> apm0: <APM BIOS> on motherboard
> apm: found APM BIOS v1.2, connected at v1.2
> pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
> pci0
> pci1: <PCI bus> on pcib1
> vga-pci0: <ATI model 4742 graphics accelerator> irq 15 at device 0.0 on
> pci1
> isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> chip1: <Intel PIIX4 IDE controller> at device 7.1 on pci0
> chip2: <UHCI USB controller> at device 7.2 on pci0
> chip3: <Intel 82371AB Power management controller> at device 7.3 on pci0
> ahc0: <Adaptec 2940 SCSI adapter> irq 15 at device 15.0 on pci0
> ahc0: aic7870 Wide Channel A, SCSI Id=7, 16/255 SCBs
> pcm0: <AudioPCI ES1370> irq 11 at device 16.0 on pci0
> pcm0: using I/O space register mapping at 0xe800
> xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 18.0 on pci0
> xl0: Ethernet address: 00:10:4b:7a:96:7d
> miibus0: <MII bus> on xl0
> xlphy0: <3Com internal media interface> on miibus0
> xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> xlphy1: <3Com internal media interface> on miibus0
> xlphy1: ignoring this PHY, non-zero instance
> device_probe_and_attach: xlphy1 attach returned 6
> Probing for PnP devices:
> atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> vga0: <Generic ISA VGA> at port 0x3b0-0x3df iomem 0xa0000-0xbffff on
> isa0
> sc0: <System console> on isa0
> sc0: VGA <9 virtual consoles, flags=0x0>
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0 at port 0x378-0x37f on isa0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> lpt0: <generic printer> on ppbus 0
> Waiting 5 seconds for SCSI devices to settle
> changing root device to da0s1a
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <IBM DCAS-34330 S65A> Fixed Direct Access SCSI-2 device
> da0: 10.000MB/s transfers (10.000MHz, offset 15)
> da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
> da2 at ahc0 bus 0 target 8 lun 0
> da2: <IBM DCAS-32160W !# S69D> Fixed Direct Access SCSI-2 device
> da2: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
> da1 at ahc0 bus 0 target 1 lun 0
> da1: <IBM DORS-32160W WA6A> Fixed Direct Access SCSI-2 device
> da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
> Enabled
> da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
> cd0 at ahc0 bus 0 target 4 lun 0
> cd0: <TOSHIBA CD-ROM XM-3601TA 0265> Removable CD-ROM SCSI-2 device
> cd0: 4.237MB/s transfers (4.237MHz, offset 15)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> WARNING: / was not properly dismounted
> vinum: loaded
> Can't open history file /var/tmp/vinum_history: Read-only file system
> (30)
> vinum: reading configuration from /dev/da2s1h
> vinum: updating configuration from /dev/da1s1f
> vinum: updating configuration from /dev/da1s1g
> vinum: updating configuration from /dev/da1s1h
> vinum: updating configuration from /dev/da2s1f
> vinum: updating configuration from /dev/da2s1g
> vinum: /dev is mounted read-only, not rebuilding /dev/vinum
> swapon: adding /dev/da0s1b as swap device
> swapon: adding /dev/da1s1b as swap device
> swapon: adding /dev/da2s1b as swap device
> Automatic reboot in progress...
>
>
> # cat /usr/src/sys/i386/conf/HOME
> machine i386
> cpu I686_CPU
> ident HOME
> maxusers 64
>
> #config kernel root on da0
>
> options INET
> options FFS
> options NFS
> options CD9660
> options FFS_ROOT
> options PROCFS
> #options MSDOSFS
> options COMPAT_43
> options SCSI_DELAY=5000
> options UCONSOLE
> options USERCONFIG
> options MAXCONS=9
> #options VISUAL_USERCONFIG
> options SOFTUPDATES
> options NO_F00F_HACK
> options ICMP_BANDLIM
> options CLK_USE_TSC_CALIBRATION
> options COMPAT_LINUX
> options AHC_ALLOW_MEMIO
> options P1003_1B
> options _KPOSIX_PRIORITY_SCHEDULING
> options _KPOSIX_VERSION=199309L
> options SYSVSHM
> options SYSVSEM
> options SYSVMSG
> options KTRACE
> options VESA
> options SC_HISTORY_SIZE=1024
> options XSERVER
> options DDB
> #options GDB_REMOTE_CHAT
>
> controller isa0 at nexus?
> controller pnp0
> controller pci0 at nexus?
>
> controller atkbdc0 at isa? port IO_KBD
> device atkbd0 at atkbdc? irq 1
> device psm0 at atkbdc? irq 12
>
> device vga0 at isa? port ? conflicts
>
> device sc0 at isa?
>
> controller fdc0 at isa? port IO_FD1 irq 6 drq 2
> disk fd0 at fdc0 drive 0
>
> controller ahc0
>
> controller scbus0
>
> device da0
>
> device sa0
>
> device cd0
>
> device pass0
>
> device pcm0
>
> device npx0 at nexus? port IO_NPX irq 13
>
> device apm0 at nexus?
>
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
>
> device ppc0 at isa? port?
> controller ppbus0
> device lpt0 at ppbus?
> #device ppi0 at ppbus?
> #device lpbb0 at ppbus?
>
> controller miibus0
> device xl0
>
> #controller smbus0
> #controller intpm0
> #device smb0 at smbus?
>
> #controller iicbus0
> #controller iicbb0
>
> #device ic0 at iicbus?
> #device iic0 at iicbus?
> #device iicsmb0 at iicbus?
>
> #controller uhci0
> #controller ohci0
> #controller usb0
>
> pseudo-device loop
> pseudo-device ether
> pseudo-device pty 16
> pseudo-device gzip
> pseudo-device bpf 4
> pseudo-device splash
> #
>
>
> /Niels Chr.
>
> --
> Niels Christian Bank-Pedersen, NCB1-RIPE.
> Network Manager, Tele Danmark NET, IP-section.
>
> "Hey, are any of you guys out there actually *using* RFC 1149?"
>
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of the message
/Niels Chr.
--
Niels Christian Bank-Pedersen, NCB1-RIPE.
Network Manager, Tele Danmark NET, IP-section.
"Hey, are any of you guys out there actually *using* RFC 1149?"
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
