Hi all, I have plenty VLLs on my network, in a NSP context, where I have "end user sites" connected to third party telcos (one vlan per end-user). The end-users are the 3rd party telcos customers, not mine.
I am trying to understand how could I secure the VLL termination on NSP side, and be able to have two connections with the 3rd party telco. For example, I'd like to have the following setup for a VLL: PE1 --> PE6,PE12 ... where PE1 is the end-user PE, and PE6 & PE12 are the 3rd party telco interconnection point with my network. I am using the following setup within my VLLs, on PE1, under MPLS context: ---- vll TELCO.ENDUSER vllid vll-peer IP-PE6 IP-PE12 untag e x/y ---- It is working, but... The question is: How could I choose which PE between 6 & 12 is the one in use in normal situation ? I have noticed that the lowest IP between both of the PE is in use, but I have no clue on how to force one to be the main, and another one to be backup. Changing the order of the PE IPs on the vll-peer line does not influence anything. Is there any way to do it ? Thanks, -- Clément Cavadore _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
