|
Hi, Ben
>What is is set to by default? The default pitch bend range value is +/-1 tone (i.e 2 semi-tones). This is a MIDI specs.
Be aware that very large pitch bend range (i.e several octaves) leads to inaccurate pitch at maximum (up or down) that pitchbend delivers.
jjc
envoyé : 4 février 2022 à 08:53
de : Ben Gonzales via fluid-dev <fluid-dev@nongnu.org>
à : fluid-dev@nongnu.org
cc : Ben Gonzales <b...@gonzos.net>
objet : Re: [fluid-dev] Pitchbend maximum
Of course. Thanks Bill.
What is is set to by default?
Ben
On 4/2/22 17:55, Bill Peterson wrote:
You can do it by using control change messages to set the Registered Parameter for pitch bend range, as described in Tom's comment on this discussion. For example, if you want to set MIDI channel 1 to have a pitch bend range of 12 semitones, send the following control changes:
cc 1 100 0 # registered parameter number MSB = 0
cc 1 101 0 # registered parameter number LSB = 0 --> pitch bend
cc 1 6 12 # pitch bend range MSB
cc 1 38 0 # pitch bend range LSB
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
|
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
