Thanks JJC.
So, the chorus.speed numbers are Hz? I just tested the speed, and 0.29
is indeed the lowest allowed.
And the chorus.depth numbers are ms? Actually, the synth allows
chorus.depth numbers only up to 21 (and I'm using 44100). Is that a
glitch/problem?
Ben
On 04/10/18 18:34, Ceresa Jean-Jacques wrote:
Hi Ben
>I couldn't find an updated man page, so I did some fiddling and came
up with these ranges.
Chorus lower speed limit is 0.29Hz (not 0) and chorus max depth limit
depends of synth.sample-rate. For example with sample rate set to
44100 Hz, chorus max depth is 46 ms.
Others range you stated are correct.
Also in my opinion, i never found that using chorus nr above 2 should
give a better sound.
Regards.
jjc
> Message du 04/10/18 01:07
> De : "Ben Gonzales" <b...@gonzos.net>
> A : fluid-dev@nongnu.org
> Copie à :
> Objet : [fluid-dev] V2 Chorus/reverb parameter ranges
>
> Version 2 has deprecated the old reverb/chorus settings I
couldn't find an updated man page, so I did some fiddling and came
up with these ranges. synth.reverb.room-size range 0, 1
synth.reverb.damp range 0, 1 synth.reverb.width range 0, 100
synth.reverb.level range 0, 1 synth.chorus.nr range 0, 99
synth.chorus.speed range 0, 5 synth.chorus.depth range 0, 21
synth.chorus.level range 0, 10 Are these correct? Any tips for the
unwary? Ben _______________________________________________
fluid-dev mailing list fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
_______________________________________________
fluid-dev mailing list
fluid-dev@nongnu.org
https://lists.nongnu.org/mailman/listinfo/fluid-dev
