Hi, David
>I am now moving on to reverb, where there appear to be other potential >problems with >ill defined parameters and numbers without units. I may come back on this. About Reverb parameters and units range, the Wiki have been recently documented please see https://github.com/FluidSynth/fluidsynth/wiki/UserManual (REVERB section). jjc > Message du 28/12/17 10:00 > De : "David Back" > A : "Tom M." > Copie à : "fluid-dev@nongnu.org" > Objet : Re: [fluid-dev] Fluidsynth bank select > > Thanks Tom > I agree that there is no need for examples if the functions really are easy to use, however at present these functions are not easy to use because the parameters are not defined adequately. I will look forward to proper definitions of reset and offset. > Yes I could use your suggested code. > I am now moving on to reverb, where there appear to be other potential problems with ill defined parameters and numbers without units. I may come back on this. > In the meantime thank you. Fluidsynth is a wonderful piece of software and I would not want to be without it. > David > > From: Tom M. > To: David Back > Cc: fluid-dev@nongnu.org > Sent: Wednesday, 27 December 2017, 14:30 > Subject: Re: [fluid-dev] Fluidsynth bank select > > Regarding "reset" and "offset" I agree they could be explained a bit more detailed. I'll see what can be done.> You also need several examples of how these functions should be used -- there are none.Sorry, there really is nothing special about using these functions. We cannot have an example for every easy-to-use function.> I have no knowledge of the "original thread" and fluid_synth_bank_select() selects the bank for only one channel at a time so is not what I needed, though it could be pressed into service if there was no alternative.Why dont you do:for(int i=0; i > _______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev
_______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev
