I'm not sure how you are currently obtaining FluidSynth, which would probably determine where to start.
Here is a likely semi-outdated general guide on building FluidSynth: https://sourceforge.net/p/fluidsynth/wiki/BuildingFluidSynth/ If you are using the autconf ./configure script, then you would pass "--enable-ladspa" switch to the configure script, like so: ./configure --enable-ladspa The cmake build system is easier in my opinion, but again, I'm not sure how you are building for your platform, so it may or may not be easier. With cmake, you just enable LADSPA by enabling the enable-ladspa option. CMake has several front ends. I use the "ccmake" interactive curses terminal interface. Basically: cd /path/to/fluidsynth/sources/ mkdir build cd build ccmake .. c # To configure FluidSynth - install development libraries as needed and keep pressing "c" after installing each one, until it succeeds Find the enable-ladspa option and switch it to ON c # Hit 'c' again to configure after changing options g # g generates the build files q # Quit ccmake make # Build FluidSynth Maybe that helps? Best regards, Element On Tue, Mar 1, 2016 at 4:52 PM, Srijan Deshpande <srij...@gmail.com> wrote: > Thank you! Could you please point me to a guide of some sort on building > fluidsynth with ladspa support? > > Thanks! > Srijan > > > On Wednesday, March 2, 2016, Element Green <elem...@elementsofsound.org> > wrote: > >> Hello Srijan, >> >> FluidSynth has LADSPA support, though I don't think it is built by >> default (you'll need to turn it on during the build configuration). You >> should be able to find a LADSPA equalization plugin. I would think that >> would be the easiest way to go if you are using it in an embedded >> environment. >> >> See "help ladspa" from within the FluidSynth shell, after you've built >> support for it. >> >> Best regards, >> >> Element Green >> >> On Tue, Mar 1, 2016 at 10:39 AM, Srijan Deshpande <srij...@gmail.com> >> wrote: >> >>> Hello, >>> >>> Does fluidsynth have some kind of EQ that I can apply to the sound >>> output? If not, what is the best way to add EQ to the sound output by >>> fluidsynth? I'm using it on a raspberry pi model 2 B with a hifiberry DAC+ >>> soundcard. Would alsaequal be the best way to go, or would it introduce >>> latency? >>> >>> Thanks, >>> Srijan >>> >>> _______________________________________________ >>> fluid-dev mailing list >>> fluid-dev@nongnu.org >>> https://lists.nongnu.org/mailman/listinfo/fluid-dev >>> >>> >> > _______________________________________________ > fluid-dev mailing list > fluid-dev@nongnu.org > https://lists.nongnu.org/mailman/listinfo/fluid-dev > >
_______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev
