Hello,
I'm trying to write to a SST25VF080B SPI Serial Flash device from a
Raspberry Pi 4. I've got the chip wired to SPI0 with a breadboard, and
I've tried using both SPI0_CE0_N and SPI0_CE1_N. The WP# and HOLD#
lines are tied high.
In trying to get this to work, I've tried two different approaches,
and both approaches resulted in the same outcome: I can identify/read
the device (all 0xFFs) but I cannot seem to write to the device. I'm
reaching out here to see if anyone has any ideas why Approach 2 (using
flashrom) doesn't work. It identifies the device but can't seem to
write.
Approach 1 (MTD device)
------------
My first approach was to enable jedec-spi-nor in the device overlay
tree in /boot/config.txt as shown below.
# Enable SST25VF080B
dtoverlay=jedec-spi-nor,flash-spi0-1
Using this approach, I'm able to see /dev/mtd0 show up and /proc/mtd
looks like this:
pi@raspberrypi:~ $ cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00001000 "spi0.1"
I can read/erase/write the device without any errors but write
operations don't seem to be written to the device. See the session
below.
pi@raspberrypi:~/workspace/overlays/flash $ sudo mtd_debug erase
/dev/mtd0 0 4096
Erased 4096 bytes from address 0x00000000 in flash
pi@raspberrypi:~/workspace/overlays/flash $ sudo mtd_debug read
/dev/mtd0 0 4096 read.bin
Copied 4096 bytes from address 0x00000000 in flash to read.bin
pi@raspberrypi:~/workspace/overlays/flash $ xxd read.bin | head
00000000: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000010: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000020: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000030: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000040: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000050: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000060: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000070: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000080: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000090: ffff ffff ffff ffff ffff ffff ffff ffff ................
pi@raspberrypi:~/workspace/overlays/flash $ dd if=/dev/zero
of=write.bin bs=4096 count=1
1+0 records in
1+0 records out
4096 bytes (4.1 kB, 4.0 KiB) copied, 0.000903078 s, 4.5 MB/s
pi@raspberrypi:~/workspace/overlays/flash $ sudo mtd_debug write
/dev/mtd0 0 4096 write.bin
Copied 4096 bytes from write.bin to address 0x00000000 in flash
pi@raspberrypi:~/workspace/overlays/flash $ sudo mtd_debug read
/dev/mtd0 0 4096 read.bin
Copied 4096 bytes from address 0x00000000 in flash to read.bin
pi@raspberrypi:~/workspace/overlays/flash $ xxd read.bin | head
00000000: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000010: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000020: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000030: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000040: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000050: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000060: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000070: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000080: ffff ffff ffff ffff ffff ffff ffff ffff ................
00000090: ffff ffff ffff ffff ffff ffff ffff ffff ................
Approach 2 (flashrom)
------------
In addition to using the jedec-spi-nor driver as shown above, I also
tried using flashrom directly with /dev/spidev0.1. I changed my
overlay tree to be as follows:
# Enable SST25VF080B
# comment this out for now... dtoverlay=jedec-spi-nor,flash-spi0-1
# Enable /dev/spidev0.1
dtoverlay=spi0-cs
Then I try to use flashroom to write to the device, but I have the
same problem with not being able to write to the device.
pi@raspberrypi:~ $ flashrom -VV -p
linux_spi:dev=/dev/spidev0.1,spispeed=60000 -w image.bin
flashrom on Linux 4.19.81-v7l+ (armv7l)
flashrom is free software, get the source code at https://flashrom.org
flashrom was built with libpci 3.5.2, GCC 8.2.0, little endian
Command line (5 args): flashrom -VV -p
linux_spi:dev=/dev/spidev0.1,spispeed=60000 -w image.bin
Using clock_gettime for delay loops (clk_id: 1, resolution: 1ns).
Initializing linux_spi programmer
Using device /dev/spidev0.1
Using 60000 kHz clock
The following protocols are supported: SPI.
Probing for AMIC A25L05PT, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L05PU, 64 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L10PT, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L10PU, 128 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L20PT, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L20PU, 256 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L40PT, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L40PU, 512 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for AMIC A25L80P, 1024 kB: probe_spi_rdid_generic: id1 0xbf, id2 0x258e
...
Probing for SST unknown SST SPI chip, 0 kB: probe_spi_rdid_generic:
id1 0xbf, id2 0x258e
Probing for ST unknown ST SPI chip, 0 kB: probe_spi_rdid_generic: id1
0xbf, id2 0x258e
Probing for Sanyo unknown Sanyo SPI chip, 0 kB:
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Winbond unknown Winbond (ex Nexcom) SPI chip, 0 kB:
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Generic unknown SPI chip (RDID), 0 kB:
probe_spi_rdid_generic: id1 0xbf, id2 0x258e
Probing for Generic unknown SPI chip (REMS), 0 kB: probe_spi_rems: id1
0xbf, id2 0x8e
Found SST flash chip "SST25VF080B" (1024 kB, SPI).
Some block protection in effect, disabling... disabled.
Reading old flash chip contents... done.
Erasing and writing flash chip... Trying erase function 0...
0x000000-0x000fff:EW, 0x001000-0x001fff:S, 0x002000-0x002fff:S,
0x003000-0x003fff:S, 0x004000-0x004fff:S, 0x005000-0x005fff:S,
0x006000-0x006fff:S, 0x007000-0x007fff:S, 0x008000-0x008fff:S,
0x009000-0x009fff:S, 0x00a000-0x00afff:S, 0x00b000-0x00bfff:S,
0x00c000-0x00cfff:S, 0x00d000-0x00dfff:S, 0x00e000-0x00efff:S,
0x00f000-0x00ffff:S, 0x010000-0x010fff:S, 0x011000-0x011fff:S,
0x012000-0x012fff:S, 0x013000-0x013fff:S, 0x014000-0x014fff:S,
0x015000-0x015fff:S, 0x016000-0x016fff:S, 0x017000-0x017fff:S,
0x018000-0x018fff:S, 0x019000-0x019fff:S, 0x01a000-0x01afff:S,
0x01b000-0x01bfff:S, 0x01c000-0x01cfff:S, 0x01d000-0x01dfff:S,
0x01e000-0x01efff:S, 0x01f000-0x01ffff:S, 0x020000-0x020fff:S,
0x021000-0x021fff:S, 0x022000-0x022fff:S, 0x023000-0x023fff:S,
0x024000-0x024fff:S, 0x025000-0x025fff:S, 0x026000-0x026fff:S,
0x027000-0x027fff:S, 0x028000-0x028fff:S, 0x029000-0x029fff:S,
0x02a000-0x02afff:S, 0x02b000-0x02bfff:S, 0x02c000-0x02cfff:S,
0x02d000-0x02dfff:S, 0x02e000-0x02efff:S, 0x02f000-0x02ffff:S,
0x030000-0x030fff:S, 0x031000-0x031fff:S, 0x032000-0x032fff:S,
0x033000-0x033fff:S, 0x034000-0x034fff:S, 0x035000-0x035fff:S,
0x036000-0x036fff:S, 0x037000-0x037fff:S, 0x038000-0x038fff:S,
0x039000-0x039fff:S, 0x03a000-0x03afff:S, 0x03b000-0x03bfff:S,
0x03c000-0x03cfff:S, 0x03d000-0x03dfff:S, 0x03e000-0x03efff:S,
0x03f000-0x03ffff:S, 0x040000-0x040fff:S, 0x041000-0x041fff:S,
0x042000-0x042fff:S, 0x043000-0x043fff:S, 0x044000-0x044fff:S,
0x045000-0x045fff:S, 0x046000-0x046fff:S, 0x047000-0x047fff:S,
0x048000-0x048fff:S, 0x049000-0x049fff:S, 0x04a000-0x04afff:S,
0x04b000-0x04bfff:S, 0x04c000-0x04cfff:S, 0x04d000-0x04dfff:S,
0x04e000-0x04efff:S, 0x04f000-0x04ffff:S, 0x050000-0x050fff:S,
0x051000-0x051fff:S, 0x052000-0x052fff:S, 0x053000-0x053fff:S,
0x054000-0x054fff:S, 0x055000-0x055fff:S, 0x056000-0x056fff:S,
0x057000-0x057fff:S, 0x058000-0x058fff:S, 0x059000-0x059fff:S,
0x05a000-0x05afff:S, 0x05b000-0x05bfff:S, 0x05c000-0x05cfff:S,
0x05d000-0x05dfff:S, 0x05e000-0x05efff:S, 0x05f000-0x05ffff:S,
0x060000-0x060fff:S, 0x061000-0x061fff:S, 0x062000-0x062fff:S,
0x063000-0x063fff:S, 0x064000-0x064fff:S, 0x065000-0x065fff:S,
0x066000-0x066fff:S, 0x067000-0x067fff:S, 0x068000-0x068fff:S,
0x069000-0x069fff:S, 0x06a000-0x06afff:S, 0x06b000-0x06bfff:S,
0x06c000-0x06cfff:S, 0x06d000-0x06dfff:S, 0x06e000-0x06efff:S,
0x06f000-0x06ffff:S, 0x070000-0x070fff:S, 0x071000-0x071fff:S,
0x072000-0x072fff:S, 0x073000-0x073fff:S, 0x074000-0x074fff:S,
0x075000-0x075fff:S, 0x076000-0x076fff:S, 0x077000-0x077fff:S,
0x078000-0x078fff:S, 0x079000-0x079fff:S, 0x07a000-0x07afff:S,
0x07b000-0x07bfff:S, 0x07c000-0x07cfff:S, 0x07d000-0x07dfff:S,
0x07e000-0x07efff:S, 0x07f000-0x07ffff:S, 0x080000-0x080fff:S,
0x081000-0x081fff:S, 0x082000-0x082fff:S, 0x083000-0x083fff:S,
0x084000-0x084fff:S, 0x085000-0x085fff:S, 0x086000-0x086fff:S,
0x087000-0x087fff:S, 0x088000-0x088fff:S, 0x089000-0x089fff:S,
0x08a000-0x08afff:S, 0x08b000-0x08bfff:S, 0x08c000-0x08cfff:S,
0x08d000-0x08dfff:S, 0x08e000-0x08efff:S, 0x08f000-0x08ffff:S,
0x090000-0x090fff:S, 0x091000-0x091fff:S, 0x092000-0x092fff:S,
0x093000-0x093fff:S, 0x094000-0x094fff:S, 0x095000-0x095fff:S,
0x096000-0x096fff:S, 0x097000-0x097fff:S, 0x098000-0x098fff:S,
0x099000-0x099fff:S, 0x09a000-0x09afff:S, 0x09b000-0x09bfff:S,
0x09c000-0x09cfff:S, 0x09d000-0x09dfff:S, 0x09e000-0x09efff:S,
0x09f000-0x09ffff:S, 0x0a0000-0x0a0fff:S, 0x0a1000-0x0a1fff:S,
0x0a2000-0x0a2fff:S, 0x0a3000-0x0a3fff:S, 0x0a4000-0x0a4fff:S,
0x0a5000-0x0a5fff:S, 0x0a6000-0x0a6fff:S, 0x0a7000-0x0a7fff:S,
0x0a8000-0x0a8fff:S, 0x0a9000-0x0a9fff:S, 0x0aa000-0x0aafff:S,
0x0ab000-0x0abfff:S, 0x0ac000-0x0acfff:S, 0x0ad000-0x0adfff:S,
0x0ae000-0x0aefff:S, 0x0af000-0x0affff:S, 0x0b0000-0x0b0fff:S,
0x0b1000-0x0b1fff:S, 0x0b2000-0x0b2fff:S, 0x0b3000-0x0b3fff:S,
0x0b4000-0x0b4fff:S, 0x0b5000-0x0b5fff:S, 0x0b6000-0x0b6fff:S,
0x0b7000-0x0b7fff:S, 0x0b8000-0x0b8fff:S, 0x0b9000-0x0b9fff:S,
0x0ba000-0x0bafff:S, 0x0bb000-0x0bbfff:S, 0x0bc000-0x0bcfff:S,
0x0bd000-0x0bdfff:S, 0x0be000-0x0befff:S, 0x0bf000-0x0bffff:S,
0x0c0000-0x0c0fff:S, 0x0c1000-0x0c1fff:S, 0x0c2000-0x0c2fff:S,
0x0c3000-0x0c3fff:S, 0x0c4000-0x0c4fff:S, 0x0c5000-0x0c5fff:S,
0x0c6000-0x0c6fff:S, 0x0c7000-0x0c7fff:S, 0x0c8000-0x0c8fff:S,
0x0c9000-0x0c9fff:S, 0x0ca000-0x0cafff:S, 0x0cb000-0x0cbfff:S,
0x0cc000-0x0ccfff:S, 0x0cd000-0x0cdfff:S, 0x0ce000-0x0cefff:S,
0x0cf000-0x0cffff:S, 0x0d0000-0x0d0fff:S, 0x0d1000-0x0d1fff:S,
0x0d2000-0x0d2fff:S, 0x0d3000-0x0d3fff:S, 0x0d4000-0x0d4fff:S,
0x0d5000-0x0d5fff:S, 0x0d6000-0x0d6fff:S, 0x0d7000-0x0d7fff:S,
0x0d8000-0x0d8fff:S, 0x0d9000-0x0d9fff:S, 0x0da000-0x0dafff:S,
0x0db000-0x0dbfff:S, 0x0dc000-0x0dcfff:S, 0x0dd000-0x0ddfff:S,
0x0de000-0x0defff:S, 0x0df000-0x0dffff:S, 0x0e0000-0x0e0fff:S,
0x0e1000-0x0e1fff:S, 0x0e2000-0x0e2fff:S, 0x0e3000-0x0e3fff:S,
0x0e4000-0x0e4fff:S, 0x0e5000-0x0e5fff:S, 0x0e6000-0x0e6fff:S,
0x0e7000-0x0e7fff:S, 0x0e8000-0x0e8fff:S, 0x0e9000-0x0e9fff:S,
0x0ea000-0x0eafff:S, 0x0eb000-0x0ebfff:S, 0x0ec000-0x0ecfff:S,
0x0ed000-0x0edfff:S, 0x0ee000-0x0eefff:S, 0x0ef000-0x0effff:S,
0x0f0000-0x0f0fff:S, 0x0f1000-0x0f1fff:S, 0x0f2000-0x0f2fff:S,
0x0f3000-0x0f3fff:S, 0x0f4000-0x0f4fff:S, 0x0f5000-0x0f5fff:S,
0x0f6000-0x0f6fff:S, 0x0f7000-0x0f7fff:S, 0x0f8000-0x0f8fff:S,
0x0f9000-0x0f9fff:S, 0x0fa000-0x0fafff:S, 0x0fb000-0x0fbfff:S,
0x0fc000-0x0fcfff:S, 0x0fd000-0x0fdfff:S, 0x0fe000-0x0fefff:S,
0x0ff000-0x0fffff:S
Erase/write done.
Verifying flash... FAILED at 0x00000000! Expected=0x61, Found=0xff,
failed byte count from 0x00000000-0x000fffff: 0x3
Your flash chip is in an unknown state.
Please report this on IRC at chat.freenode.net (channel #flashrom) or
mail [email protected], thanks!
As you can see, it appears to identify the chip as "SST25VF080B", and
it's able to read/erase/write. However, when it goes to verify the
written values it fails.
Does anyone have any idea of things to try?
Thanks!
Anthony
_______________________________________________
flashrom mailing list -- [email protected]
To unsubscribe send an email to [email protected]
