Steve,
If you do not have proper removal equipment and are having ANY problems
getting it out intact - forget trying to remove it intact - clip its
leads off and remove them one leg at a time.
You may find it quicker to ask Elecraft for a replacement than waiting
for shippment from another source. A note to [EMAIL PROTECTED] will
likely have the part on its way to you Monday.
73,
Don W3FPR
Steve Kallal wrote:
Don,
I found that I'd installed U7 backwards. U7 is at the heart of the bias
control. I can't find a cross reference for LMC6482 at a couple of local
parts stores. I don't know if removing it and reinstalling it will work. I
am having problems removing and it may have been damaged.
I am trying to find a cross reference on the interent and seeing if a couple
of parts stores might have it. They don't have a reference for it.
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
