Hi, I managed to fix my K2 after an intermittent on the Control Board appeared. In the process I did a master reset hoping somehow that would fix my problem. Now that my K2 is operational again, I've lost some of my power output. It is almost certainly a calibration or setting issue. I didn't build this K2 nor any other. So I don't know my way around the rig. It also has the KAT2 option, which probably also lost some settings. My power used to peak at 15 watts on 40 meters. Now it is lucky to get 10 watts. Otherwise the K2 seems just fine. Can someone point me to right part of the manual to make the necessary adjustments. My K2 is serial number 2289. It has the mods for the conversion of Revision B and the 2.04p firmware. The KAT2 firmware is 1.09, at least that is the second # showing in the version display. 73,
Steve N6VL _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
