Bill,
The most common cause of low output on 10 meters is T2 - be certain it
is wound exactly like the illustration in the manual (except for the
number of turns in the illustrations which may or may not be correct).
The second thing is T4 - be certain it is wound as instructed in the manual.
Thirdly, check the low pass filter for the correct number of turns on
the toroids and check the capacitors. On the 10 meter band, spread the
turns of the low pass filter inductors as much as you possibly can.
73,
Don W3FPR
William M. Spaulding, SR wrote:
Folks,
I'm having a real struggle getting 6 to 7 WATTS on 28 Mhz while all other all
other bands come up with a number well in excess of 10 Watts.
Has anyone experienced this problem and was able to solve it? I'm suspecting
low pass filters that are not coordinated to the 10 Meters Caps, if you can get
my drift. I can't come up with a reason for this. In fact, it may make 10
Meters useless for some modes.
Help?
Bill
NA7Y
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
